Civic EG

hondajunkee · Posted: Fri Nov 23, 2007 6:20 pm Post subject: d16z6 on engine stand pic request

im picking up a d16z6 tomorrow and i was wondering if anyone had pictures of a d series on an engine stand. im trying to figure where to mount it and i really dont want to break anything. also which bolts did you use? Thanks guys
_________________

ChicagoMike · Posted: Fri Nov 23, 2007 7:32 pm Post subject:

As for the bolts, you go to the local hardware store and get bolts that are about 1/2" longer than your transmission bolts.......but they have to be the same thread pitch as your tranny bolts. Its probably a good idea to pick up some washers too, just in case you have to make adjustments.

And here's your pic on how/where to mount it. thumb up

_________________

------> ALL MOTOR <------
♫ d(-.-)b TRANCE d(-.-)b ♫

hondajunkee · Posted: Fri Nov 23, 2007 7:36 pm Post subject:

cool thanks man that helps a ton, do you happen to know the thread size of the tranny bolts?
_________________

ChicagoMike · Posted: Fri Nov 23, 2007 7:37 pm Post subject:

Off the top of my head, no..........but I'll see if I can find it for ya.
_________________

------> ALL MOTOR <------
♫ d(-.-)b TRANCE d(-.-)b ♫

ChicagoMike · Posted: Fri Nov 23, 2007 7:41 pm Post subject:

Everything I've come across says this.....

M12X1.25mm
_________________

------> ALL MOTOR <------
♫ d(-.-)b TRANCE d(-.-)b ♫

JDM FERIO MAN · Posted: Sat Jan 12, 2008 7:36 am Post subject:

by my sohc vtec head $300 all new sh1t

LSR · Noobie Joined: 27 Mar 2008 Posts: 1 Feedback Score: 0

-EJ1- COUPE · Posted: Thu Mar 27, 2008 1:53 pm Post subject:

this is my motor i just used the tranny bolts through the stand

_________________
92 hatch build in progress.....

Snap-On Tools!

TEAM NSN to the fullest!!

East Coast is the Right Coast!!!

Classiccarsrule85 · Posted: Mon Jan 12, 2009 4:29 am Post subject:

i know this is sorta old n stuff but the bolts i use are the upper trans mount and motor moutn bolts they thread perfectly in 17mm head n for mine i had to use a couple of washers but it beat trying to find the stuff at the store just thought id mention this
_________________

1995 Civic CX-project sold
1992 civic cx -New project
not using punctuation or good sentence structure since day 1

biretsu89 · Posted: Wed Jan 14, 2009 6:23 am Post subject:

All I used was 3 of the trans bolts... i didnt even bolt the thing 100 percent of the way and it was still good thumb up

.. it is only a honda motor.... not that heavy for a motor

coeg · Posted: Mon Jan 19, 2009 5:18 pm Post subject:

Yeah there really not that heavy at all.

CivicEG · Posted: Tue Jan 20, 2009 8:41 pm Post subject:

Sentry · Posted: Wed Jan 21, 2009 12:09 am Post subject: