Civic EG

hi all, im buying a 1993 civic lsi hatch with the non vtec d15 engine (as much as insurance will allow me as im only 19). what im intrested in knowing is what i need to fit a 1.8 5dr vti engine into my d15 engined car, loom, driveshafts, engine mounts etc. thanks,

You will need the Engine, tranny, axles, mounts, ECU, engine harness shift linkages and I think thats about it. At least from what I can remember.

Greasedmonkey wrote:You will need the Engine, tranny, axles, mounts, ECU, engine harness shift linkages and I think thats about it. At least from what I can remember.

Not sure what engine he is talking about, however If its a LS(B18A/B) You need all this. If its a GSR(B18C) you will need everything above, as Well as wiring to Run VTEC and Knock Sensors.

Thats assuming its all OBD1. If the Car is OBD2(96+) You will need a Conversion Harness to make it OBD1(92-95).

in uk lsi is d15 engine. i basically need a car to break for the engine. tis okay will find one for when i get back off tour.