Civic EG

Posted: **Thu Oct 30, 2008 2:40 pm**

will type r cams do anything for me in a gsr motor? any at all?

Posted: **Thu Oct 30, 2008 4:09 pm**

yes they would.

Posted: **Thu Oct 30, 2008 7:42 pm**

well what would be the dif, if i just threw those in with nothing else? 5hp?10hp? im going turbo so im sure they will help. so what would i get out of them. how much should i sell the gsr cams for?

Posted: **Thu Oct 30, 2008 8:59 pm**

if you go turbo get Crower cams. and depends which type r cams. B18c has a less aggressive VTEC lobe where as the cams found in B16B are noticeably different.

Posted: **Fri Oct 31, 2008 4:46 pm**

i couldnt use the crower stage 2 cams could i with a stock bottom end besides eagle rods?

Posted: **Sat Nov 01, 2008 2:22 am**

you you can. you just need need the valve springs that match those cams.

Posted: **Sat Nov 01, 2008 10:57 pm**

^^ listen to him. if your going boost, it's a good time to spend money on the head and making it stronger.

Posted: **Mon Nov 03, 2008 8:16 pm**

Posted: **Fri Nov 07, 2008 3:56 pm**

No one said this lol but im guessing your putting this in something thats not a GSR?

You will gain something not very much the only thing you will notice big time is that your RPM Range will hold longer and not fall off so fast :thumb:

Posted: **Mon Nov 10, 2008 2:18 pm**

it is gsr. i wanted to leave the head alone besides a valve job. but eagle rods and wiseco pistons and 10lbs of boost. i definetly should beef up the head? i dont want to rev 8500-9k though. thats how you break stuff

Posted: **Mon Nov 10, 2008 5:11 pm**

you dont really need to do anything to the head. the ITR cams will hurt you more than help you when boost is involved.