Page 1 of 1
B18b swap mount help requested
Posted:
Tue Mar 25, 2014 11:57 pmby myers503
I have been reading a lot about this swap, but I am confused about the motor mounts.
I need a straight forward list of what I'll need to get in order to mount the b18b into my 94 lx sedan. Can someone provide me the names and or a picture of what I'll need, please
Posted:
Wed Mar 26, 2014 1:52 amby teal_dx
Is your car auto or manual and is the engine a 2 or 3 post mount?
Posted:
Wed Mar 26, 2014 1:56 amby myers503
I have a manual. I am unsure of post mount..
Posted:
Wed Mar 26, 2014 3:10 amby teal_dx
Ok. Here's 2 options for you.
One for 2 post:
http://www.corsportusa.com/store/catalo ... s_id=10988
and one for 3 post
http://www.corsportusa.com/store/catalo ... s_id=10962
Hasport makes some of the best mounts out there and Corsport is a trusted vendor with many happy forum members on this site.
Posted:
Wed Mar 26, 2014 3:17 amby myers503
Thanks. I keep seeing something about the bracket? From the civic
Posted:
Wed Mar 26, 2014 3:32 amby myers503
Will the Integra mounts all line up with my eg
Posted:
Tue May 27, 2014 3:09 pmby myers503
so I hav almost everything for my swap. I got a trans (ls) but no mount on it. i do however have the upper mount on the drivers side of the engine. a coupe questions (since i cannot get aftermarket mounts yet)
I have a rear t bracket (integra) and I read somewhere that I can use that with my civic mount.
I have the drivers side top mount (integra) and understand that it will work.
I have the mount off my d series to use on the LS trans (top mount)
Am I correct>>>??????
Posted:
Wed May 28, 2014 12:00 amby CopyLifted
Posted:
Wed May 28, 2014 1:33 amby myers503
Posted:
Sat Jun 07, 2014 6:54 amby bks84
if youre keeping AC youll need the ac mount bracket from a del sol VTEC (b16a3) or 97-01 CRV (b20b/z).
Posted:
Sun Jun 08, 2014 12:32 amby CopyLifted
bks84 wrote:if youre keeping AC youll need the ac mount bracket from a del sol VTEC (b16a3) or 97-01 CRV (b20b/z).
Correct.
For reference sake: CRV P7J (part # 38930-P7J-000), or Del Sol B16 P54 (part # 38930-P54-000) A/C bracket is what is needed to retain A/C.
Posted:
Thu Jul 17, 2014 5:45 amby panic989
Like teal said you can't go wrong with a set of HASport mounts. And if you live in AZ you can go straight to them and pick up a full set for about $330.
Posted:
Sat Aug 09, 2014 7:42 pmby dmar13
so. are these the same mounts to be used for a b20b swap? and does it matter if the tranny is auto or manuel when it comes to using the tranny mount that bolts to the underside of the cars frame? that pic save me some time as well.
Posted:
Sat Aug 09, 2014 8:14 pmby panic989
Yes all b series mounts are the same so that doesn't matter. The auto tranny I'm not sure about but their website would be able to tell you all you need to know about them. Are you asking about the t bracket mount or the front mount on the tranny?
Ps these cats don't have the traditional "frame" it's a uni body. Just a heads up.
