Civic-EG.com Forum 3.3.1

- Tue Mar 25, 2014 11:57 pm #343723 I have been reading a lot about this swap, but I am confused about the motor mounts.

I need a straight forward list of what I'll need to get in order to mount the b18b into my 94 lx sedan. Can someone provide me the names and or a picture of what I'll need, please

/94 lx sedan. B18b1, ls trans. Six puck clutch. Custom ram intake. Racer design coil overs.

[teal_dx]

- Wed Mar 26, 2014 1:52 am #343725 Is your car auto or manual and is the engine a 2 or 3 post mount?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Mar 26, 2014 1:56 am #343726 I have a manual. I am unsure of post mount..

/94 lx sedan. B18b1, ls trans. Six puck clutch. Custom ram intake. Racer design coil overs.

[teal_dx]

- Wed Mar 26, 2014 3:10 am #343727 Ok. Here's 2 options for you.
One for 2 post: http://www.corsportusa.com/store/catalo ... s_id=10988

and one for 3 post http://www.corsportusa.com/store/catalo ... s_id=10962

Hasport makes some of the best mounts out there and Corsport is a trusted vendor with many happy forum members on this site.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Mar 26, 2014 3:17 am #343729 Thanks. I keep seeing something about the bracket? From the civic

/94 lx sedan. B18b1, ls trans. Six puck clutch. Custom ram intake. Racer design coil overs.

- Wed Mar 26, 2014 3:32 am #343730 Will the Integra mounts all line up with my eg

/94 lx sedan. B18b1, ls trans. Six puck clutch. Custom ram intake. Racer design coil overs.

- Tue May 27, 2014 3:09 pm #345907 so I hav almost everything for my swap. I got a trans (ls) but no mount on it. i do however have the upper mount on the drivers side of the engine. a coupe questions (since i cannot get aftermarket mounts yet)

I have a rear t bracket (integra) and I read somewhere that I can use that with my civic mount.

I have the drivers side top mount (integra) and understand that it will work.

I have the mount off my d series to use on the LS trans (top mount)

Am I correct>>>??????

/94 lx sedan. B18b1, ls trans. Six puck clutch. Custom ram intake. Racer design coil overs.

- Wed May 28, 2014 12:00 am #345919

- Wed May 28, 2014 1:33 am #345922 Cheers bro. exactly what I needed!!!!

/94 lx sedan. B18b1, ls trans. Six puck clutch. Custom ram intake. Racer design coil overs.

- Sat Jun 07, 2014 6:54 am #346234 if youre keeping AC youll need the ac mount bracket from a del sol VTEC (b16a3) or 97-01 CRV (b20b/z).

A little piss ant like you isnt worth being banned over.

Yea he has a bad habit of being overly sarcastic.. .. at the wrong times..

- Sun Jun 08, 2014 12:32 am #346245

if youre keeping AC youll need the ac mount bracket from a del sol VTEC (b16a3) or 97-01 CRV (b20b/z).

Correct.

For reference sake: CRV P7J (part # 38930-P7J-000), or Del Sol B16 P54 (part # 38930-P54-000) A/C bracket is what is needed to retain A/C.

- Thu Jul 17, 2014 5:45 am #347182 Like teal said you can't go wrong with a set of HASport mounts. And if you live in AZ you can go straight to them and pick up a full set for about $330.

MY vtec went BWAAAAHHHH!!!!!


No more honda ladies and gents :'(

- Sat Aug 09, 2014 7:42 pm #347767 so. are these the same mounts to be used for a b20b swap? and does it matter if the tranny is auto or manuel when it comes to using the tranny mount that bolts to the underside of the cars frame? that pic save me some time as well.

- Sat Aug 09, 2014 8:14 pm #347768 Yes all b series mounts are the same so that doesn't matter. The auto tranny I'm not sure about but their website would be able to tell you all you need to know about them. Are you asking about the t bracket mount or the front mount on the tranny?

Ps these cats don't have the traditional "frame" it's a uni body. Just a heads up.

MY vtec went BWAAAAHHHH!!!!!


No more honda ladies and gents :'(