B16, B18, B20
By Squirrelman91
#328486 When I took my b18 apart I didn't mark my cams. my motor is at tdc but I don't know where my cams should be can you guys help me??
By Squirrelman91
#328549 I didn't mark my cams at tdc so how do I get my head to tdc??
User avatar
By HaydenSI
#328554 You can set the cams in any way you want. the lobes will adjust the valves depending on how you sit the cams in. From there you can adjust your timing. Or just set your cams in so they look exactly like this



Image
User avatar
By HaydenSI
#328555 Just be sure that if you have to adjust the timing To remover the Spark plugs and rotate counter clock wise so you aren't turning against compression.
By Squirrelman91
#328557 My cams won't go in like the pic their off a little. And I don't know how to set the timing
User avatar
By HaydenSI
#328558 Are you 100% sure the bottom end is at TDC?