B16, B18, B20
By Squirrelman91
#326224 Is it ok if I turbo a stock b18b1 and if so where would be a good place to run a oil line to the turbo besides drilling in to the block
User avatar
By 92civicEGsedan
#326227 Get a oil filter sandwich adapter that way the only thing you will have to drill is the return line from the turbo and just run a line from the adapter to the turbo
User avatar
By kylenjdm93
#326270
Civic_HatchSI wrote:Use a "T" off the oil pressure switch


This works but the sandwich plate is better you should not have to drill anything but the oil pan for the return line


If wanting to do it professional quality...

Get the sand which plate, install the right sized A/N fittings and steel braided line, install A/N fitting to turbo

Install A/N fitting to the downpipe use a steel braided line for the return line, get a steel A/N fitting welded to the oil pan

No leaks non swelling no headache also get a Turbo timer they save the life of the turbo not to mention your engine life also :thumb: