B16, B18, B20
User avatar
By jred
#322176 Im gonna be breaking in my engine soon after the mech. finish re-build and assemble the engine
he told me to use 20w50 oil, but when i used google most of the stuff i found said to use 10w30 or 10w40 so im a bit unsure now what to really use, dont want to damage my engine alot of $$ was spent..also what oil to use after the engine has been breaked in? 10w30????
User avatar
By JUICE
#322177 This gonna be NA or boosted?


Either way, i'd start with Brad Penn high zinc break-in oil. I'd go with the weight your builder recommends cause he's the one that set the oil clearances and sounds like he set them to run a good thick oil. But yea, Brad Penn oil is the shit and not outrageously expensive.
By bks84
#322203 ive just used the cheapest shit the parts stores sells as long as its non-detergent and then switched over to brad penn 10w30.
User avatar
By mADmAN
#322213
bks84 wrote:ive just used the cheapest shit the parts stores sells as long as its non-detergent and then switched over to brad penn 10w30.


+1

i just used the cheapest oil... n that was what my mechanic recommended as well...

after run in... then changed to the good stuff
User avatar
By jred
#322221 cool thanks for the info guys :thumb: