- Mon May 07, 2012 8:49 pm
#304187
hi guys
my situation:
i have a EDM dpfi obd0 93 eg4 lsi
i have removed the d15b2 engine
and replaced with a b16a2
from a EDM ek4 mpfi obd2
i know i cant use the original harness on the b16 as it is obd0
so i am going to get a d16z6 engine harness as it is obd1
i know i need to convert from dpfi to mpfi, i found this link.
http://www.d-series.org/forums/diy-foru ... rness.html
it says in the thread i need a obd1 dizzy, however i am looking a buying this and was wondering if i needed one as it has a dizzy harness included??
http://h-tune.co.uk/index.php?route=pro ... uct_id=709
1.will this package help me complete my conversion?
2, do i need an OBD1 dizzy?
3, is the dpfi to mpfi link the correct thing to do?
4,will i need to modify the z6 harness in any way?
5,is the link below how i should wire in vtec to complete the conversion?
http://imageshack.us/photo/my-images/81 ... wireo.jpg/
i have done tones of research but there is not much about for EDM carbd motors and if anyone can answer these questions it would help me out big time!
thanks
my situation:
i have a EDM dpfi obd0 93 eg4 lsi
i have removed the d15b2 engine
and replaced with a b16a2
from a EDM ek4 mpfi obd2
i know i cant use the original harness on the b16 as it is obd0
so i am going to get a d16z6 engine harness as it is obd1
i know i need to convert from dpfi to mpfi, i found this link.
http://www.d-series.org/forums/diy-foru ... rness.html
it says in the thread i need a obd1 dizzy, however i am looking a buying this and was wondering if i needed one as it has a dizzy harness included??
http://h-tune.co.uk/index.php?route=pro ... uct_id=709
1.will this package help me complete my conversion?
2, do i need an OBD1 dizzy?
3, is the dpfi to mpfi link the correct thing to do?
4,will i need to modify the z6 harness in any way?
5,is the link below how i should wire in vtec to complete the conversion?
http://imageshack.us/photo/my-images/81 ... wireo.jpg/
i have done tones of research but there is not much about for EDM carbd motors and if anyone can answer these questions it would help me out big time!
thanks