B18C Swap Question - front subframe
Posted: Tue May 01, 2012 4:38 pmCan the whole Integra subframe go into the EG chassis or do you just use the EG subframe and get the auto to manual mount adapter? Which steering rack also is used?
Civic EG
Forum for the Honda Civic EG 1992-1995
http://civic-eg.com/forum/
B18C Swap Question - front subframe
Page 1 of 1
Posted: Tue May 01, 2012 4:38 pmPosted: Tue May 01, 2012 6:16 pmIf the car is auto then you will need an auto to manual mount. The subframe and rack won't need to be swaped out.
Posted: Tue May 01, 2012 6:59 pmI have the full GSR subframe, so would it be better to swap it out? I also have the full bushing kit for the GSR. I am just curious if it will work, and if it does, what mounts would be needed. Thx
Posted: Tue May 01, 2012 7:13 pmThe subframes are the same the bushings might switch over but I don't know.
As for mounts, it don't matter the stock d or the gsr. The only difference is the auto and manual passenger side mount and the driver side. The driver side mount will be either a 2 bolt or a 3 bolt mount so make sure you use the mount that is for the motor.
As for mounts, it don't matter the stock d or the gsr. The only difference is the auto and manual passenger side mount and the driver side. The driver side mount will be either a 2 bolt or a 3 bolt mount so make sure you use the mount that is for the motor.