B16, B18, B20
User avatar
By blk92hb
#303511 If the car is auto then you will need an auto to manual mount. The subframe and rack won't need to be swaped out.
By walkerhiboost
#303518 I have the full GSR subframe, so would it be better to swap it out? I also have the full bushing kit for the GSR. I am just curious if it will work, and if it does, what mounts would be needed. Thx
User avatar
By blk92hb
#303521 The subframes are the same the bushings might switch over but I don't know.

As for mounts, it don't matter the stock d or the gsr. The only difference is the auto and manual passenger side mount and the driver side. The driver side mount will be either a 2 bolt or a 3 bolt mount so make sure you use the mount that is for the motor.