Oil pressure switch wire

B16, B18, B20
 Reply

Oil pressure switch wire

By 95eg4door
- Wed Apr 25, 2012 2:47 am #302778 OKay i just picked up a swapped 4 door with a b18c1. and im missing my vtec oil pressure switch. can anyone tell me where i can get a new wire set up and tell me how to hook it up.

By 95eg4door
- Wed Apr 25, 2012 3:55 am #302789 i really need help with this so if anyone knows where i can get a vtec oil pressure switch please let me know and if u could tell me how to hook it up that would be very helpful
User avatar

By teal_dx
- Wed Apr 25, 2012 1:51 pm #302817 Here's a pinout:
http://www.ff-squad.com/technet/wiring.obd1.htm

Looks like you will need to tap into D6 :thumb:
I'd look on ebay or junkyard or classifieds for the vtec oil pressure switch.

By 95eg4door
- Wed Apr 25, 2012 3:11 pm #302822 see ive been looking everywhere for the wire set up and i literally can not find it anywhere every integra i find doesnt have vtec and idk if the oil pressure switch from a d16 will work or not might have to try it all i have been able to find from any sight are these these
http://www.ebay.com/itm/Airtex-1S6722-O ... 69&vxp=mtr
and i dont actually need that im just missing the wire..
User avatar

By teal_dx
- Wed Apr 25, 2012 5:29 pm #302829 That's no problem... Check out this mini-me DIY:
http://civic-eg.com/viewtopic.php?t=10

I simply ran my own wires and connected them to the sensor using small spade connectors The only difference is that you will have to run them thru the firewall to the ECU because only the 1992 hatchbacks had the vtec wiring going into the engine bay (for non-vtec models)

By 95eg4door
- Wed Apr 25, 2012 5:57 pm #302838 YES!!! :thumb: thank you so much see i thought i was able to run my own wires but i wasnt really sure and with the money i already puit into it i didnt wanna end up messing anything up.
What gauge wire do u recomend??

By 95eg4door
- Wed Apr 25, 2012 6:43 pm #302849 thanks man thatll be a big help where did u ground it??

By 95eg4door
- Wed Apr 25, 2012 10:58 pm #302871 okay thatnk you i will let u know how it works out once i get it done..
:thumb:
User avatar

By suspendedHatch
- Thu Apr 26, 2012 3:25 am #302912 Stock gauge is 18 on 95% of all wiring in the car. Erring on the thicker side (16) wont hurt anything.

By 95eg4door
- Thu Jul 05, 2012 4:52 am #310153 So i think i have problem not really sure what it is. So vtec hits 1st and second but third once i get to like 5500rpm sounds like my vtec is like skipping.. :x

By 95eg4door
- Thu Jul 05, 2012 4:49 pm #310183 Yeah i found out the my oil pressure switch got cut? not sure how it got cut but it did. can that cause any damage to my motor? and is it normal for it to kick in 1st and 2nd but not third?? :?

By 95eg4door
- Mon Aug 06, 2012 8:34 pm #312944 Okay so what kind of ends will i need to hook up my vtec oil pressure switch wire to my ecu and to the vtec oil pressure switch itself
 Reply
Return to B Series