Civic-EG.com Forum 3.3.1

- Sun Feb 05, 2012 9:45 pm #293432 how is a 94 obd1 gsr swap(map sensor in the harness) into a 92 lx(firewall mounted map sensor) supposed to have the map wired? the wires for the factory setup are ran right into my ecu as my only map wires. and i dont have any voltage out to the map sensor thats in the engine harness. BUT the thing is the car ran like this somehow when i bought it. can anyone give me some info?

- Mon Feb 06, 2012 7:13 pm #293539 use the factory (to the car) setup, run a vacuum line from the engine to the map...

A little piss ant like you isnt worth being banned over.

Yea he has a bad habit of being overly sarcastic.. .. at the wrong times..

- Wed Feb 08, 2012 4:50 am #293837 i had the same issue cuz i also have i 92 what i did was i built a harness and ran it right to the ecu directly

- Wed Feb 08, 2012 10:00 pm #293947 yeah i have the one from the ecu hooked up now thanks for the help guys but wheres that vacuum line supposed to come from?

- Wed Feb 08, 2012 11:39 pm #293961 off the intake manifold... doesnt matter exactly where as long as it sees vac.

A little piss ant like you isnt worth being banned over.

Yea he has a bad habit of being overly sarcastic.. .. at the wrong times..

[Ajax1989]

- Thu Feb 09, 2012 2:39 am #293993

off the intake manifold... doesnt matter exactly where as long as it sees vac.

this is correct


im gonna lock this one up
OP you have that other thread "hopeless gsr"