building a jdm gsr

B16, B18, B20
 Reply
User avatar

building a jdm gsr

By JDM FERIO MAN
- Sun Dec 18, 2011 2:27 am #285820 Hay can I use p30 b16a pistons on stock gsr rods and crank with bc stage 3 na cams and ferra hi comp valves help me out plz thank you
User avatar

By dbrooks
- Sun Dec 18, 2011 3:05 am #285821 If you run B16 pistons, it's going to raise your compression. It has been done, but I don't know how reliable it is. Good luck :thumb: I'd rather go with something made for the block (i.e. forged pistons)
User avatar

By JDM FERIO MAN
- Sun Dec 18, 2011 6:00 am #285837 I used jdm b16a pistons in my old gsr thats not what im asking I am building a gsr for a friend and he go bc cames aka stage 3 na cams and bc valve springs and ferra valves with the b16 pistons sit to close to the valves or will it be ok lol I dont mess with hondas no more haha so I for get shit

By bks84
- Sun Dec 18, 2011 8:29 am #285845 Do it right, clay it for clearance. Otherwise, slap it together and hope for the best.
User avatar

By asianrob
- Sun Dec 18, 2011 3:44 pm #285868 im pretty sure it will work with those PR3 pistons,

it might be close with the CTR Pistons but im not sure on that.

By bks84
- Sun Dec 18, 2011 7:43 pm #285880 pretty sure < positive

Clay. The. Motor.

and when you're done doing that...

Degree. The. Cams.
 Reply
Return to B Series