Civic-EG.com Forum 3.3.1

- Fri Aug 05, 2011 10:29 pm #266442

which intake
itr,skunk2,edelbrock

ITR and Skunk2 is pretty much the same.. Edelbrock if your going big on power..

Team XXX Racing/WGHonda
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294

- Fri Aug 05, 2011 11:19 pm #266446 ok if itr and skunk2 are in the range ill go for itr
its cheaper
but one thing i dont unnderstand is
if itr and skunk2 are pretty much the same why guys with and itr
will change stock intake for skunk2 if they are the same
some guys does cross this side (nl) what about
cross that side (us)

does that make sence

- Sun Aug 07, 2011 9:39 pm #266667 ignition cut is this harmfull for the engine
some backfires are damn
call of duty blackops

- Tue Aug 09, 2011 8:19 am #266842

ok if itr and skunk2 are in the range ill go for itr
its cheaper
but one thing i dont unnderstand is
if itr and skunk2 are pretty much the same why guys with and itr
will change stock intake for skunk2 if they are the same
some guys does cross this side (nl) what about
cross that side (us)

does that make sence

ill go for the edelbrock performance x
i seen some good numbers with that intake

- Tue Aug 09, 2011 7:21 pm #266877

ok if itr and skunk2 are in the range ill go for itr
its cheaper
but one thing i dont unnderstand is
if itr and skunk2 are pretty much the same why guys with and itr
will change stock intake for skunk2 if they are the same
some guys does cross this side (nl) what about
cross that side (us)

does that make sence

Simple.. it comes with the inside smoothed out anddddddddddddd you can go to about 75mm on boring it out.. i think ITR is limited to 68mm before it goes into the IACV port.

Team XXX Racing/WGHonda
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294

- Tue Aug 09, 2011 7:25 pm #266878

ignition cut is this harmfull for the engine
some backfires are damn
call of duty blackops

What are you referring to? Hondata?

Team XXX Racing/WGHonda
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294

- Tue Aug 09, 2011 10:17 pm #266889

ignition cut is this harmfull for the engine
some backfires are damn
call of duty blackops

What are you referring to? Hondata?

ectune neptune hondata

- Thu Aug 11, 2011 8:56 pm #267186 which plugs for my b20vtec

- Wed Aug 17, 2011 9:32 pm #267896 Edelbrock has the most gains but it is a bit pricey.

"If you want your car to be cheap and fast it wont be reliable... If you want your car to be reliable and cheap it wont be fast... If you want your car to be fast and reliable it wont be cheap"