B16, B18, B20
User avatar
By civic15
#252461 Hi i have a 98 civic with an automatic trany that i've recently swap into a b18 with a manual transmisson the only problem i had is to make the revers light work

when i swap my civic automatic to manual i had to cut wire near the shifter and when i put a yellow wire with a black wire the reverse light work so where should i plug this 2 wire on my trany??
User avatar
By Eg6H2D
#252480
teal_dx wrote:There's a sensor on top of the tranny with 2 wires coming from it. That is for your reverse lights.

Image


For the Bseries trans it's going to be on the side closer to the torque mount. facing the Bell Housing.. =]
Right where that gray plug is on the above picture..
:thumb:
User avatar
By civic15
#252518 thanks i'll try to find that :thumb: