B16, B18, B20
User avatar
By kapow
#251848 My state law states that I have to leave my stock air filter box intact

But I was to squeeze a bit more ponys out of my B16, so would I see any increase in power with a skunk2 intake manifold even if I have a stock air box?
User avatar
By forcefedEG
#251851 Probably so, the skunk2 has more of a plenum and bigger runners

can u use a k&n filter or anything like that, if you can get a k&n filter for your stock box and if you can swap out the factory tube between the throttle body and air box, the stock tube causes a lot of turbulence from being ribbed. As long as that dosent break nay laws you should be good :thumb:
User avatar
By kapow
#251854
forcefedEG wrote:Probably so, the skunk2 has more of a plenum and bigger runners

can u use a k&n filter or anything like that, if you can get a k&n filter for your stock box and if you can swap out the factory tube between the throttle body and air box, the stock tube causes a lot of turbulence from being ribbed. As long as that dosent break nay laws you should be good :thumb:


I had exactly the same thing in mind, like replace it with aluminium piping instead because of the ribbed rubber one. Cheers mate :)
User avatar
By Loki_95EG
#251884 I was actually gonna write the same thing lol!! Great minds!