Civic EG

ok iam doing ian all motor poor mans type r ppl tell me to get the aebs intake manny but it seems like its not for all motor. from what there site says it looks like its for Forced induction "The plenum chamber has been lengthened to provide additional plenum volume when used with a supercharger, turbo or nitrous applications."

cuz i would like to use the aebs intake, hytech header, and what size thottle body do you guys think i should use??

AEBS manifold is great for all motor. also its based off the ITR manifold.

its a little bigger than a stock ITR manifold if i remember correctly.

but i would use if for an NA app.

I had it on my b16, together with a tuned ecu it made the world in difference for my motor.
Now i have it with by b18c6 and hytech copy header, still does it job.
Don´t bother the throttle body unless you can get one machined och new for cheap. Very small gains.

well my set up thus far
is stock b16 head the block is a 82mm boar with 11.5.1 wisco pistons ,eagel rods, ectune with a type r base map, so do u think an aebs intake manny and a hytech header will be a bad ass set up iam looking to race a vr6 that thinks he is greece lightning

VR6 are strong in the +200km/h area and B16 are not, my guess is that if the race is not about top speed you got a chance ;)

well its got a b16 head on a gsr block and type r cams