Civic EG

I have a 93 hatch with a b18b1 non vtec obd1.But i LOVE the look of the obd2 valve cover.Is it possible to make one work i heard yes and no on this.Someone please claify this for me! Thanks

it bolts right on just gotta figure out a way to plug/cover the hole in the top/middle where the obd2 LS and B20 intake mani has its PCV valve.


i was gonna go to lowes and look for a rubber plug of some sort. let me know if you figure out something better

i readup on that pvc valve as well.I would say just a rubber plug will do fine.But i also heard they are different heights or something.Got a pic of your engine there"JUICE"?

i'm still rockin my OBD1 valve cover..


gotta get the old paint off my newer one, repaint it, and find a good plug still...

the obd2 non v will go right on 2 an obd1 non v motor

now if ur eg use 2 be auto and u converted it 2 stick and u did not use the right trany mont then ur vc may rub on the hood

so if ur eg is oem stick slap it on u wont rub

i have the o bd2 cover on my motor. a oil drain plug fits the hole just fine.

just in case that rubber vent case gasket grommet thing breaks cracks etc...i have a cheap fix the volvo 200/700/900 and i beleive the 850 works as well but the brake master cyl rubber grommet fits right in nice and tight and then throw a oil drain plug right in.

well.I have a valve cover located off my buddy for free!I was thinking a big tap,then put an aluminum plug like this in..http://www.google.ca/imgres?imgurl=http ... 9,r:14,s:0