Page 1 of 1
Build questions
Posted:
Sun Sep 19, 2010 11:48 amby 94coupeturbo
So I was curious as to what yall think of what I want to do and if it shall work fine
B18A1
Arp Headstuds
Arp Connecting Rod Bolts
Arp Flywheel Bolts
Nippon Pistons Rings (Std)
Cometic Headgasket
440CC Injectors
Gates Timing Belt
Walbro 255lph High Pressure Fuel Pump
Hondata 4 bar MAP Sensor
F1 Clutch and Flywheel
T04E 57 Trim Turbo Setup (14Psi)
N1 2.5 Catback Exhaust
Phearable.Net OBD1 Ecu (Loaded Basemap Custom)
Then a Good Tune.
Just looking for opinions and thoughts. TIA
Posted:
Sun Sep 19, 2010 4:33 pmby Greasedmonkey
Might want a bigger exhaust. Will the Headgasket be thicker than stock?
Posted:
Sun Sep 19, 2010 10:15 pmby 94coupeturbo
Ok will consider bigger exhaust. I was looking at 81MM BORE
.027" MLS GASKET. So I hope it is but am not to sure on it.
http://thmotorsports.com/cometic/cometi ... 57840.aspx
Posted:
Sun Sep 19, 2010 10:29 pmby That One Dude
How much power do you want to put down? That'll determine your injector sizing.
Posted:
Sun Sep 19, 2010 10:40 pmby 94coupeturbo
300+ is what I am hoping for hp.
Posted:
Mon Sep 20, 2010 1:09 amby That One Dude
You're going to need more than 440cc/min from your injectors. Like 650s.
Posted:
Mon Sep 20, 2010 6:06 amby Greasedmonkey
94coupeturbo wrote:Ok will consider bigger exhaust. I was looking at 81MM BORE
.027" MLS GASKET. So I hope it is but am not to sure on it.
http://thmotorsports.com/cometic/cometi ... 57840.aspx
Thats effectively the stock thickness. Not going to be a problem really, but a thicker one will lower the CR and allow more boost. SLightly.
Posted:
Mon Sep 20, 2010 9:14 amby 94coupeturbo
Ok well that is why I was coming here for info I can go a little thicker and the still around the same price. So thicker HG, bigger exhaust and bigger injectors is what I need to look into then. Also added ARP B-series Pressure Plate Bolt Kit. This is not my big build but just one to get me going and the Honda back up and going. I picked it up for cheap cause the guy was going to crush it. Saved its life lol. Any other input would appreciate. Thanks
Posted:
Mon Sep 20, 2010 8:57 pmby Greasedmonkey
Yep. Looks like a plan. Boosted LS motors are very nice.
Posted:
Mon Sep 20, 2010 9:57 pmby 94coupeturbo
Cool. Appreciate all the help and info, just want to make my build reliable and have a little fun as well