J30, J32, J35 & J37
User avatar
By boos-tit
#103243
JDM-Z6 wrote:
boos-tit wrote:my shop is actually doing two v6 swaps right now. one in an eg hatch and one in an ek hatch. the ek is actually a full jdm ctr conversion with the 3.5 vtec odessey motor



damn that's sweet i cant wait to this happen to my EG Hatch... question what type of mounts are they are using to drop that engine in


were sponsored by hasport and were using modded hasport mounts.
By scorchio69
#106638 Hi guys from the other side of the atlantic, the whole point about eg hatches is to keep them light and handle very well with good suspension, now slotting in one of these heavy V6 lumps to me is pointless if you want your car to handle really well, it has been done over and over here in the uk but with vauxhall corsa,s and vw polo,s getting v6 engines fitted, but you show any of these cars our awesome highland/twisty roads over here and they just understeer widly, I will add the extra torque would be nice and they sound well ok but i like my cars to handle
User avatar
By chrono404
#106814
scorchio69 wrote:Hi guys from the other side of the atlantic, the whole point about eg hatches is to keep them light and handle very well with good suspension, now slotting in one of these heavy V6 lumps to me is pointless if you want your car to handle really well, it has been done over and over here in the uk but with vauxhall corsa,s and vw polo,s getting v6 engines fitted, but you show any of these cars our awesome highland/twisty roads over here and they just understeer widly, I will add the extra torque would be nice and they sound well ok but i like my cars to handle


If you are going to make a Drag Racer this engine is a good swap. Much better then a H Swap.

If your going to make a Auto Cross Racer or something for good handling this is a really bad swap. You can get some of it back with good sway bars, and suspension tuning. A turbo D or B would be a much better swap for this purpose.

However like I eariler stated this is an awesome swap for Drag Racers.
User avatar
By bcolladonet
#202320 im putting a 3.2 tl type s on my with hansport mount a axles