Page 1 of 1

VTEC Spool Sensor Wire

PostPosted: Tue Mar 22, 2016 1:55 am
by dinkoy
Hi everyone! So my vtec spool sensor wire got detached for some reason. Would it affect my car's performance? Would it be okay if i direct wire it instead of using the grey plugs? Im having difficulty attaching the wire back to the other end.

Re: VTEC Spool Sensor Wire

PostPosted: Tue Mar 22, 2016 3:17 am
by TrailerTrash
dinkoy wrote:Hi everyone! So my vtec spool sensor wire got detached for some reason. Would it affect my car's performance?


yes very much so. without the wire connected, VTEC is not going to engage.

dinkoy wrote: Would it be okay if i direct wire it instead of using the grey plugs? Im having difficulty attaching the wire back to the other end.


it isnt that simple. youll need to either get a replacement plug or whatever part is broken in order to get in functioning properly

Re: VTEC Spool Sensor Wire

PostPosted: Thu Mar 24, 2016 2:50 am
by teal_dx
I think he meant just bypass that single wire grey connector and connect the 2 wires together with a crimp/solder?

Re: VTEC Spool Sensor Wire

PostPosted: Thu Mar 24, 2016 3:12 am
by TrailerTrash
ah that could be. i probably misunderstood that

Re: VTEC Spool Sensor Wire

PostPosted: Tue Mar 29, 2016 1:53 pm
by dinkoy
Yes that's what I meant. Would it be fine if I do that?

Re: VTEC Spool Sensor Wire

PostPosted: Fri Apr 01, 2016 3:36 am
by teal_dx
Yeah, you could do it that way. The only downfall is if you ever have to replace the sensor, you'll have to cut the wires and re-solder them. Or if you ever remove the head engine harness, you'll have to remove the sensor to keep it with the harness.

Re: VTEC Spool Sensor Wire

PostPosted: Wed Apr 20, 2016 2:19 am
by dinkoy
teal_dx wrote:Yeah, you could do it that way. The only downfall is if you ever have to replace the sensor, you'll have to cut the wires and re-solder them. Or if you ever remove the head engine harness, you'll have to remove the sensor to keep it with the harness.



Thanks! Saved me the hassle.