D15, D16, D17 and Mini-Me swaps
By IconEG
#356615 Hey guys i have a d15b7 pulley i took of that engine since i swapped in a Z6 i wanted to kno if i can use that one or if the timing marks are the same ? Pls help :D
User avatar
By teal_dx
#356649 I know for sure they have different OEM Part #'s. I believe both motors are 16 degrees btdc, so I don't see why it wouldn't work.
By IconEG
#356670
suspendedHatch wrote:The marks will be off. The Z6 is the oddball head. If you swap the cam sprocket, you'll have to compensate for the timing mark difference. Not worth the trouble.


i just bought a z6 pulley and it was the same marks as my d15 also the TDC mark was aligned with the top cam gear. so is this right ?