Civic EG

Posted: **Fri Jun 05, 2015 6:14 pm**

Hey guys been awhile. Anyone running a block gaurd on their boosted d? wanting to know if they are worth the investment.

Posted: **Fri Jun 05, 2015 8:18 pm**

from what i have researched before,

some people have cooling issues after a block guard.
maybe it was installed incorrectly...i wouldnt know

i have buddies that sleeved the block rather then run a block guard

Posted: **Fri Jun 05, 2015 9:17 pm**

I personally would never run a block guard. You either sleeve your block or run the CSS. My .02

http://cylindersupportsystem.com/

Posted: **Mon Jun 08, 2015 7:51 pm**

thx guys I thought it might be to good to be true. I am not gonna be outputting to much power so I will just run the motor without one. Appreciate the input.

Posted: **Mon Jun 15, 2015 10:04 pm**

If your gonna use a block guard, their are two types
the ones to buy and the ones to stay away from

the ones to stay away from

had this type on my engine and it cause cooling problems, the tiny holes were not big enough for the coolant to pass through easily and after time they got a build up of muck and was almost clogged up...

The ones to buy

Golden eagle and black works makes like these, the coolant passages are lot bigger to allow proper cooling, wish i had research block guards when mines went in, I learnt the hard way........

well that my advice to ya if you decide to use a block guard :thumb: