D15, D16, D17 and Mini-Me swaps
User avatar
By Gram0401
#347748 I have a d16z6 in a 94 hatch, right now the car has the 2 bolt drivers mount. What I need to know is do I use a 94-up integra 3 bolt engine bracket to convert my mount to a 3 bolt?
By J40987
#347809 There are five mounts in the engine bay. Three are main supports that the motor and transmission rest on. The other two, below the transmission case and the one usually found on the ac bracket are more for the motor's rotation I believe.

Would you be referring to the motor mount which is attached near the serpentine belt, or the transmission support bolted above the transmission casing?
User avatar
By blk92hb
#347810
Gram0401 wrote:I have a d16z6 in a 94 hatch, right now the car has the 2 bolt drivers mount. What I need to know is do I use a 94-up integra 3 bolt engine bracket to convert my mount to a 3 bolt?


Yes. You will need the mount and the bracket on the block
User avatar
By Gram0401
#347864
blk92hb wrote:
Gram0401 wrote:I have a d16z6 in a 94 hatch, right now the car has the 2 bolt drivers mount. What I need to know is do I use a 94-up integra 3 bolt engine bracket to convert my mount to a 3 bolt?


Yes. You will need the mount and the bracket on the block


Thanks that is what I needed to know. I will be heading to the salvage yard soon.