Civic-EG.com Forum 3.3.1

- Mon Aug 04, 2014 5:50 pm #347669 So today I started my car up for the second time after being put in and the first time it started great and ran fine.. The second start it started and idled up and down(like a bad iacv) but faster then it would seem, then tried to give it gas and sounded like it was going to die. Was told mass air flow sensor or air in the coolant, couple different thing I just need to get this problem fixing ASAP!


Any help would be appreciated!

[teal_dx]

- Mon Aug 04, 2014 5:54 pm #347670 Did it have a check engine light? If so, what code did it bring up?

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Mon Aug 04, 2014 7:48 pm #347673 It is on but I will check and let you know

[teal_dx]

- Mon Aug 04, 2014 7:57 pm #347674 Sounds good, that should tell you exactly what's causing the problem

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Aug 06, 2014 8:47 pm #347712 It's codes

3,21,22 I think

- Wed Aug 06, 2014 10:22 pm #347713

It's codes

3,21,22 I think

http://civic-eg.com/viewtopic.php?t=1558

3 MAP - manifold absolute pressure sensor
21 VTEC spool solenoid valve
22 VTEC pressure valve

Check your plugs, and make sure your VTEC solenoid is plugged in and the wires are good.

- Sat Aug 09, 2014 3:14 am #347758 Okay so I put on a new map sensor, went to start it and still doing the samething now I have codes 3, 7, 14, 21,2 22 I know the code but how does that happen if I just replaced the map sensor?