Civic-EG.com Forum 3.3.1

- Sat Aug 03, 2013 8:21 pm #335102 Hello,

I have d16 turbo,
engine internals modified, and ported, the only thing left is
what camshaft to choose for turbo engine?

I was thinking about zex 59500 but a bit affraid of peak power rpms...,
I know that best should be bisimot 2.4, but its price'y too,
maybe you guys know better cams??

Any suggestion apreciated...

- Sun Aug 04, 2013 1:58 am #335109 We made 402whp on our z6 with the bisi cam. Carried power up to 8.5k rpms and started to drop after 9

Yeah I have a 4dr, no you can't have a ride.

- Sun Aug 04, 2013 9:25 am #335113

We made 402whp on our z6 with the bisi cam. Carried power up to 8.5k rpms and started to drop after 9

i see, so bisi still is good, but maybe there another alternatives?
what about zex 95300 and 95500 ?

- Mon Aug 05, 2013 1:06 am #335133 I read into them but none of the setups ive seen using a zex cam made over 350whp, not that the cam may not be able to make that power just most were not setup to make much more than that

Yeah I have a 4dr, no you can't have a ride.

- Mon Aug 05, 2013 8:41 pm #335161

I read into them but none of the setups ive seen using a zex cam made over 350whp, not that the cam may not be able to make that power just most were not setup to make much more than that

maybe you have any suggestions where i can get bisi in europe, or england?

any shop?


What about crawler?

- Tue Aug 06, 2013 1:53 am #335167 Now thats a tough one. And do you mean crower? Crower makes some good stuff, I'd go with them if they shipped international

Yeah I have a 4dr, no you can't have a ride.

- Tue Aug 06, 2013 6:16 pm #335189 any suggestions where to order europe, england whatever?

I hear in others forums that there is some Debbie ;]]] dont know which company, they are making cams for Bisimoto company, so if you approach them directly they sell you cheapper even with better service blah blah...

any ideas which company it is?

any other suggestions for purchasing cams in europe?