D15, D16, D17 and Mini-Me swaps
User avatar
By Gimme Wafflez
#326647 If this is in the wrong section feel free to move it.

I bought an AEM cold air intake off a friend and it didn't have any instructions and i'm pretty sure it's missing hose.

I'm going to go buy the hose i need but my question is, where does the hose from the right hole go to??

Image

any help would be very much appreciated :thumb:
User avatar
By HaydenSI
#326655 There should be an outlet in the top left of your valve cover. Thats where it should plug up to.
User avatar
By Gimme Wafflez
#326667 Yeah I believe the left hole is for the hose coming from the valve cover but what is the right hole in the intake used for?
User avatar
By Gimme Wafflez
#326674 fixed: I realized I didn't need that left hole, so i plugged it and ran hose line from the valve cover to the right hole on the intake. seems to be running fine, and sounds great. i'll probably use it for awhile then buy a new AEM COI thats made for my exact year. thanks guys
User avatar
By d-mon
#326841 thats for an obd2 iat sensor, don't worry about it.