Civic-EG.com Forum 3.3.1

- Wed Nov 14, 2012 2:45 am #319922 I just bought a '92 civic that the owner swapped a D16A6 (from a '91 civic) block into, and he said it has a head from a D16Z6 on it. I looked it up and I think the head is supposed to be vtec.

The car came with a P05 ecu and it has been acting a little strange since I bought it, kind of sputters a little bit sometimes. Previous owner said it might be running rich and might need a P06 ecu.

What ecu do you think I should try putting in the car?

I read somewhere that cars that came with D16A6's had PM6 ecu's, and cars that came with D16Z6's had P28 ecu's so I don't know what to try.

Thanks for the help!

- Wed Nov 14, 2012 8:00 pm #319976 p28.
pm6 is obd0, you want obd1 ecu for 92-95 civics.

street machines > dyno queens
z6 turbo power FTW tuned on crome

- Wed Nov 14, 2012 10:53 pm #319991 p28.

- Thu Nov 15, 2012 12:46 am #319997 So since the z6 head is a vtec, if I just get a p28 ecu will it work the way it's supposed to, or do i need to run a wire from the ecu to something? If so, can someone post a link to more info on how to do this? Thanks

[teal_dx]

- Thu Nov 15, 2012 1:21 am #319999 scroll down just past 1/2 way on the mini-me DIY: http://www.civic-eg.com/viewtopic.php?t=10 for wiring info.

92 hatches are pre wired for vtec up to the shock tower

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage