Civic EG

Posted: **Tue Oct 16, 2012 2:12 am**

What's up guys having issue finding out where to put this hose I've looked everywhere!!
Its a jdm d15b vtec obd1 5speed
I looked on majestic honda to see diagram but all I could find is the name of the hose and its location isn't really specific,
Here's a pic

Posted: **Tue Oct 16, 2012 4:10 am**

Help!

Posted: **Tue Oct 16, 2012 4:27 am**

If there is nowhere and everyrhing is all pluged up then just cap it

I believe the non vtec has an extra coolent port or vise versa

Posted: **Tue Oct 16, 2012 4:43 am**

Thanks dude I'll try that out :thumb:

Posted: **Tue Oct 16, 2012 4:50 pm**

where does the other end of that hose go?
usdm d15s have an 'extra' nipple on the 'water pipe' that d16z6 and jdm d15b do not have (closer to water pump).
but that doesn't look long enough to reach.

Posted: **Tue Oct 16, 2012 10:16 pm**

d-mon wrote:where does the other end of that hose go?
usdm d15s have an 'extra' nipple on the 'water pipe' that d16z6 and jdm d15b do not have (closer to water pump).
but that doesn't look long enough to reach.

My bad crappy cell pic cut off the rest, its the hose under the one that runs to the air intake, I will take another pic when I get off work.
I looked at my friends eg with d15b7 and made me confused, the location his is connected to is a nipple next to the heater hose nipples on engine side (next to water pump) and that nipple on my engine is already being used and runs to the back of the intake manifold on the idle air control valve nipple.
Is there a difference between 92-93 and 94-95?
I'm going to get a plug but will still be researching..

Posted: **Wed Oct 17, 2012 5:37 pm**

not sure, because i have 2 d16z6 intake manifolds.
one has a nipple under the cyl 4 runner, the other does not.
the nipple is not shown in the helms manual or any year Honda parts diagrams.
i will be using it to feed my water cooled turbo.

Posted: **Thu Oct 18, 2012 2:41 am**

d-mon wrote:not sure, because i have 2 d16z6 intake manifolds.
one has a nipple under the cyl 4 runner, the other does not.
the nipple is not shown in the helms manual or any year Honda parts diagrams.
i will be using it to feed my water cooled turbo.

so guess it's safe to just plug it ?

Posted: **Thu Oct 18, 2012 5:04 am**

Yeah your good to plug it up or even if you want just T it back into another coolent line :thumb:

A "t" and some clamps can cost but 5$
Thats what id do :thumb:

Posted: **Thu Oct 18, 2012 5:04 am**

Yeah your good to plug it up or even if you want just T it back into another coolent line :thumb:

A "t" and some clamps can cost but 5$
Thats what id do :thumb:

Civic EG

heater breather hose?

heater breather hose?