Civic-EG.com Forum 3.3.1

- Thu Mar 29, 2012 1:27 pm #300289 So I just got done with my last project it included a6 cam and valve springs y8 cam gear port and polished intake mani (z6) b18 tb and mani is port matched to tb with a fresh tune up .... Along with this I already had misimoto intake header and exhaust ....so my question is whats next ....is there any injector fuel pump comb that will compliment this set up or what other bolt ons to do . I am familiar with ex trans and plan on doin that as well but what mods as far as motor goes

1994 CIVIC Lx Camellia red pearl ( purple)

- Tue Apr 03, 2012 8:41 pm #300809 Any suggestions

1994 CIVIC Lx Camellia red pearl ( purple)

- Tue Apr 03, 2012 8:47 pm #300811 Maybe get a header if you don't have on already.

I'd probably get a EX/Si transmission, as well.

[teal_dx]

- Wed Apr 04, 2012 2:07 am #300846 The transmission will make a huge difference. You don't need bigger injectors or higher rate fuel pump with the mods you have.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Apr 04, 2012 3:24 am #300862 lightweight flywheel

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Fri Apr 06, 2012 2:27 pm #301102 so looks like i gotta save my pennies and get ex trans with lightweight flywhell and a good clutch ..thanx guys

1994 CIVIC Lx Camellia red pearl ( purple)