Re: zc
Posted: Sun Sep 06, 2009 5:10 amnowell_legano wrote:can a block of zc fit into a stock head of ph16?
Yes I think it fits on your local ph16 head
Yes I think it fits on your local ph16 head
Page 3 of 4
Posted: Sun Sep 06, 2009 5:10 amYes I think it fits on your local ph16 head
mini me
Posted: Mon Nov 30, 2009 1:29 ammini me swaps... what kinda hp do they put out... d15b7 block d16z6 head...thanks in advance and how do they do with boost ,or nitrous set ups ... im pulling my gsr to sell for extra cash... i have a mini me and a nitrous kit already...
specs
Posted: Mon Mar 22, 2010 4:04 amwhat about jdm zc block spec's
Posted: Sun Apr 04, 2010 6:54 amSo if you were to do a mini-me swap, how much power would the motor have would it be from the head or block that you know how much its making?
Posted: Wed Apr 14, 2010 10:03 pmwoohoo, mine D16z6 is runnin standard bhp, but more torque(113)
Posted: Sat Jun 19, 2010 9:18 pmhi there im just new here is the D15B7 also the same as the D15-E
if not what would be the same type of the D15-E
if not what would be the same type of the D15-E
Re: specs
Posted: Tue Aug 31, 2010 5:42 pm93_EG_Beast wrote:what about jdm zc block spec's
wthats what im sayinPosted: Thu Nov 18, 2010 1:48 pmthx for the info 
Re: D-series engine specs
Posted: Mon Feb 28, 2011 11:00 pmteal_dx wrote:engine - cc - hp - tq - compression ratio - bore (mm) - stroke (mm) - head - vtec - OBD - vehicle
I am thinking about replacing my D15B7 engine for my 92 civic... what is a good swap for that engine ???
Posted: Wed Mar 09, 2011 4:55 pmjmoshe, swap in the d16z6 if your looking to stay sohc, us the ex tranny and p28 ecu, harness is the same obd1 just wire in the vtec.
Posted: Fri Mar 11, 2011 1:44 pmhey what ecu is for the d15b7 because im thinkin bout chippin it. or possibly doin mini-me
What this spec on this
Posted: Sat Jun 25, 2011 2:48 amI have 93 hb auto but on the block it says zc then under that says 3501500 what's the spec's on this. Thanks
Posted: Thu Oct 20, 2011 2:40 amI have a 70 hp D15B8. The D15B7 has 102 hp. What is the difference in these engines? Can I easily modify mine to get the other 32 hp on tap? Thanks for any info.
Posted: Sun Feb 26, 2012 1:06 amI was wondering I have a d16y7. I wanted to know what I can do to get the most power out of it. Looking for more of a bolt on route. Turbo and minime is out of the question.
Posted: Thu Apr 18, 2013 7:04 pmdo you have specs on d15b1, please?
I have that block and head.
I have that block and head.