D15, D16, D17 and Mini-Me swaps
User avatar
By teal_dx
#495 engine - cc - hp - tq - compression ratio - bore (mm) - stroke (mm) - head - vtec - OBD - vehicle
Image
Last edited by teal_dx on Fri Aug 15, 2008 5:29 pm, edited 2 times in total.
User avatar
By LaMbErT*
#4568 What about a D14a4 ma mates got one in his ej9 and a wanna know whats gunna be faster my D15b2 or his D14a4
User avatar
By vtec_gloucester
#4569 your lsi engine is like 92bhp and im pretty sure the 1.4's are about 80bhp so you should whoop his ass :thumb:
User avatar
By LaMbErT*
#4570 hopefully :P His car is sexual, real import from the fogs to the tailgate i love it and it is hella quick!
User avatar
By eg-civic-racer
#4571 in think that the 1400 is a single carb? my mate had one and it was fast as feck as well!
User avatar
By ohDirka
#7399 just picked up a d15b6 to replace my b2...gas goes up hp is goin down lol
User avatar
By Bouli
#7935
D15kid wrote:just picked up a d15b6 to replace my b2...gas goes up hp is goin down lol


hp is going down, but torq increases ?
User avatar
By bumpin
#19149 what about the d16zc? is it the same with z6?
User avatar
By ohDirka
#19156
Bouli wrote:
D15kid wrote:just picked up a d15b6 to replace my b2...gas goes up hp is goin down lol


hp is going down, but torq increases ?


the d15b6 only has like 60 hp, ive tried to do burnouts but it just aint happenin
By DannyCraQ
#25458 hmmm so is there really a difference between a d15b and a d15 b7?

do the wiring harness change? im afraid ima blow my new engine up ha
User avatar
By JDM FERIO MAN
#26368 I have a sohc zc in my eg8 what hp is that
User avatar
By Ej2-B16a
#31876 D13A2 1.3 8V SOHC 2bbl Carb 1342 60hp@5500rpm 73tq@3500rpm '87 Civic/CRX 1.3 (USA)
User avatar
By suspendedHatch
#47995
DannyCraQ wrote:hmmm so is there really a difference between a d15b and a d15 b7?

do the wiring harness change? im afraid ima blow my new engine up ha


The D15B7 is a 1.5 liter non VTEC engine.

The D15B is a 1.5 liter VTEC JDM import only engine making similar power to the D16Z6. It came in two flavors, OBD1 and OBD2. If you get the OBD1, your harness will plug in and you'll just have to wire VTEC. That is assuming that you get a P28.
User avatar
By LaMbErT*
#57054 Where can i see the full of this as theres no table names up the top we theres random 0's and no's on the table i have a rough idea what its on about tho