D15, D16, D17 and Mini-Me swaps
User avatar
By ej2??
#330235 my d15b7 317xxx miles 8) just put a6 cam z6 intake feels better but i want a basemap or a simple tune for all the junk now

Image
User avatar
By Bobec
#330549 It`s far from complete, but i already like it 8)

Image
Image[/img]
Last edited by Bobec on Fri Sep 06, 2013 9:12 am, edited 1 time in total.
User avatar
By baconsauce
#330848
crazy-88 wrote:Image
freshly built jdm D15B


so fresh..
User avatar
By Ajax1989
#331247 here is the last engine shot I took before sellin my eg

Image

for those wondering, my name used to be
94_jdm_ferio
User avatar
By MikesEJ1
#332046 Image
mine,wrinkle red
Image
User avatar
By eg-guy
#334871 My z6 with shaved wrinkle black valve cover
Image
z6 with white valve cover
Image
User avatar
By SCKAPE
#338330 My D13 ;)
Image
User avatar
By 1-low-92-EG-Sedan
#338353 here is my D16Z6

parts list/machine work is as follows

-head was milled and valves where newly seated and has new seals
-NGK spark plugs and wires
-Spec-D tuning 4-2-1 header
-short ream intake with K&N filter
-Y8 intake manifold
-stage 3 XTD 6 puck sprung clutch
-P28 chipped ecu

-brand new crank with matching bearings and rod replacement $400
-OEM oil pump from Honda $140
-OEM water pump from Honda $65
-OEM timing belt from Honda $40
-Hastings piston rings (std. bore) $35
-honed out cylinders (did my self)
-new oil pan $75
-ARP head studs $110
-ALL the seals and gaskets in the lower end (head gasket, rear main seal, oil pan gasket etc. etc.) all about $75

so basically the bottom end is brand new 8) 8) :thumb:

i have put about 500 miles on it so far and everything seems to be running awesome..the car started right up with out any hesitation on its first start up...it sounds like its running really healthy so far

i painted the block and transmission to make them look nice as well :thumb:

Image
Untitled by Busone10, on Flickr

Image
Untitled by Busone10, on Flickr

Image
Untitled by Busone10, on Flickr

Image
Untitled by Busone10, on Flickr

Image
Untitled by Busone10, on Flickr

Image
Untitled by Busone10, on Flickr

ARP head studs installed
Image
Untitled by Busone10, on Flickr

just about to put it all back in the car
Image
Untitled by Busone10, on Flickr

sorry for some of the blurry pics but this is it all in the car
Image
Untitled by Busone10, on Flickr
User avatar
By silverEG8
#341053 :hehe:
Last edited by silverEG8 on Tue Jan 07, 2014 2:12 pm, edited 1 time in total.
User avatar
By silverEG8
#341054
sickvtec wrote:does anybody runs a single carburetor? please post your picture here if ya dont mind :woot:


My ride runs on carb. I'll post some pics later :lol:
User avatar
By 1-low-92-EG-Sedan
#341186
junmadrid wrote:
sickvtec wrote:does anybody runs a single carburetor? please post your picture here if ya dont mind :woot:


My ride runs on carb. I'll post some pics later :lol:


looking forward to seeing it!! :thumb: