Headlights, Turn Signals, Tail Lights, Fog Lights, HID's for Coupe, Hatch, Sedan and Del Sol models
By 93sihatchguy
#262468 Good luck finding a clean set like that.
User avatar
By kingjmack
#262505
strigga wrote:Hello,
i'm looking for retrofitted headlights for civic eg like on the picture.


Those look like ebay headlights that someone has put morimoto HID's in.

http://www.theretrofitsource.com/index. ... 3nl26vgpt5
User avatar
By Eg6H2D
#267966
kingjmack wrote:
strigga wrote:Hello,
i'm looking for retrofitted headlights for civic eg like on the picture.


Those look like ebay headlights that someone has put morimoto HID's in.

http://www.theretrofitsource.com/index. ... 3nl26vgpt5



That's exactly what was done and the person who fitted themm is on this site too.. lol.

:thumb:

its a DIY project!!
User avatar
By mitch6
#281939 I did a http://www.theretrofitsource.com EG6 Bi-Xenon HID projector swap. Its really not that bad at all if you buy the morimotto D2S Mini H4 Projectors. They are literally like plug and play once you remove the glass from the headlight housing.

I bought some SPEC-D headlights with black housing, removed the glass by baking the headlight to soften the seal. Then remove the hardware inside and screw in the H4 projector. I even put in some LED city lights :D

The only tricky part is to make sure you align them right, and that was also easy because these D2S projectors screw in so nicely. No gluing like many other people end up having to do for projectors such as the FXR's.

Over all project cost after shipping was about $330. I recommend it, it was money well spent!! Thses projectors are very bright!! and extend so far!

Here are some pics:
Image from ebay
Image
Image
Just needed to add the shourds to cover the hardware and make it look more clean
Image
shrouds are in this picture, not the best picture but it was all I have atm lol
Image
these are OEM white 4300K Bulbs but since they are TSX/RDX like replicas, they have that color change when your lights flicker up and down bumps.
User avatar
By strigga
#295587 so they fit on the oem srew holes (of the aftermarket headlights)?

so i can buy the projectors -> http://www.ebay.com/itm/MORIMOTO-MINI-D ... d1&vxp=mtr

and a aftermarket xenon kit? that's everything i need?
User avatar
By mitch6
#296700 you also need to buy the appropriate shrouds to make the retro-fit look much cleaner, but yea that’s it for the most part. Make sure your kit comes with bi-xenon solenoid connectors to hook up the bi-xenon, and buy a quality HID kit, not some ebay garbage :thumb:
By s3eg6
#318289 those are my lights if you take your time like mitch6 said you will have a nice set of clean lights. i chose to use the ebay 1 piece lights and ordered the full hid d2s mini morimoto set from theretrofitsource.com
User avatar
By kingjmack
#318290 OP, if your interested, I've got a set of headlights already retrofitted with a kit from theretrofitsource I would let go for $200 ($220 shipped). The headlights are used, but the hid kit is new/never used.
Image

Image

Image

Image
User avatar
By couch_c
#318293 where'd those headlights come from?
User avatar
By kingjmack
#318294
couch_c wrote:where'd those headlights come from?


My headlights came from ebay, and I installed the projectors in them.
By Press10
#319848 dang kingjmack thats a super good price, the retro kit alone even with a group buy code through TRS goes for more than that.
User avatar
By strigga
#334499 Hey, i have some problems to fit my morimoto mini h1 in the civic headlights.
when i srew in the big screw i have some space between projector and headlight.
Here a video of it: http://youtu.be/37Bbv2aqbvY