injectors on build b series with nitrous
Posted:
Thu Jan 01, 2009 12:47 am
by lopez286
what would be a good size injector to run on a built b series motor, he's planning to run about 200 shot of nitrious, would a set of 350cc injector work good for him.i have never built a nitrous motor i have built plenty of turbos motors but this is completly diff... any help is app. thanks.
Posted:
Thu Jan 01, 2009 7:00 am
by chrono404
Use Stock injectors, Tune the Fuel with a Wet Nitrous Kit.
Posted:
Thu Jan 01, 2009 8:10 pm
by ej2rey
chrono404 wrote:Use Stock injectors, Tune the Fuel with a Wet Nitrous Kit.
Yeah that would be true if it were to ba stock motor. But I think he's going to spray on a built motor. So it would be like running all motor so 350 are the way to go.
Posted:
Thu Jan 01, 2009 9:04 pm
by ChicagoMike
I'm running 440's on my all motor set up. My injectors are running about 70%. Just food for thought.
Posted:
Thu Jan 01, 2009 9:47 pm
by ej2rey
ChicagoMike wrote:I'm running 440's on my all motor set up. My injectors are running about 70%. Just food for thought.
440's at 70% sounds about right.
Posted:
Sun Jan 04, 2009 5:48 am
by lopez286
thanks for the input guys
and yea it's a fully builts motor we are going to be running a wet kit too. we are going with the 350cc
Posted:
Sun Jan 04, 2009 5:57 am
by lopez286
whe are going to start with a 200 shot
Posted:
Sun Jan 04, 2009 6:01 am
by ej2rey
lopez286 wrote:whe are going to start with a 200 shot
Niiiiiiiiiiiiiiiiiiicce! Yo...wet dreams! Lol
That should push sum great numbers at the dyno and sum great times at the track.
Posted:
Sun Jan 04, 2009 6:03 am
by lopez286
lol, thats what we are hoping for