Post YOUR Sedan here
User avatar
By dionisis
#94789 trully awesome supercharged sedan!!! :thumb: :thumb: :thumb:
User avatar
By swich
#116023 Image
please remember this is a dyno pack. figures will be higher on a rolling road.

hit the limit on the head. we just can get air in to make power from 5500.

im now looking for the z6 head.
User avatar
By swich
#148417 hey guys new link it open to the public to read...

http://www.importknights.co.za/index.ph ... 213.0.html

all im going to say is
Image
User avatar
By Simmons
#148418 Running lekka hey :thumb:
User avatar
By LaMbErT*
#148455 i haven't seen many supercharged d's nice man! Good work!
User avatar
By swich
#153321 okay seeing as almost no one from my country is on here ill tell you guys what im doing /doing. ( i cant hold it in any more)

okay i ran bearings so i thought time to rebuild.

so my plans are as follows.

increase boost, intercooler/aftercooler, build the bottom end, mini me swap.

so as it is now. just had the block honed to 76mm got vitara's to go in there. still waiting for me rings.

doing b18 rods that have been shot peened, get the 2mm bushings made on monday. using a new stock crank. with ACL race bearings.

i have ported and shimmed my oil pump. that takes care of the bottom end. i hope.

going to port match the intake side of the head and step port and polish the exhaust side. still running stock z6 head.

the SC i have pulled apart to port it and get the rotors heat treated. as well s fabricate a charge cooler of sorts to sit between the SC and intake manifold. im also doing a 3.1" nose pully to boost at about 12psi.

i have just imported my P28 from the states and we going to tune it with crome.

will let you know more as i go....

so what you think of that?
User avatar
By Simmons
#153360 Lekka guy :thumb:
cant w8 to see it when its done