Post YOUR Sedan here
User avatar
By ntruder98
#353424 Im probably going to go with a 205/45/15 on a set of rpf1s whenever i can finally get my running good! But it is running now, drove it to work a couple times. Sure did miss it. Instead of investing in new wheels with new tires i would probably just put new tires on those wheels. Saves alot of money
User avatar
By Alh081_EH9
#353443 I love rpf1s. Couldnt find a set local tho but i'll probably pick up a set if i can find a good price on it.

i ended up buying new wheels already though. discontinued fn01rc. waiting for tires to come in and then put them on this week.
User avatar
By Alh081_EH9
#353617 So the enkei 92s are sold. Ended up buying a set of discontinued 5zigen fn01rc wheels. Just put them on. Not 100% sure if I like them too much. Maybe a change of color??

Image

Image
User avatar
By TrailerTrash
#353637 looks dam good :thumb: :thumb: :thumb:
User avatar
By Leppy
#353665 Personally, I think that color combo is perfect as is.
User avatar
By Alh081_EH9
#353675 I was leaning into white wheels also. i will try it and if i dont like it, i'll switch back. Will post pics of them white when im done.
User avatar
By Loaf31
#353676 you can use white plasti-dip just to see what white would look like on them, and you can remove it if you don't like it. :D
User avatar
By Alh081_EH9
#353678
Loaf31 wrote:you can use white plasti-dip just to see what white would look like on them, and you can remove it if you don't like it. :D


YUP. bought 2 cans of that yesterday already
User avatar
By Alh081_EH9
#354095 AS OF LAST WEEK. CAR CURRENT OUT OF ORDER!!!

some reason, no spark. tried to use a obd2 distributor but no luck. time to find an obd1 and try again. :thumbdown:
User avatar
By teal_dx
#354244 I think the new wheels look perfect :thumb:

Also I don't think an OBD2 dizzy will work on an OBD1 car because OBD1 dizzy has the Crank Fluctuation Sensor inside the Dizzy and OBD2 motors have it on the drivers side of the block instead of in the dizzy. Wiring is different as well.
What motor do you have?
User avatar
By Alh081_EH9
#354260
teal_dx wrote:I think the new wheels look perfect :thumb:

Also I don't think an OBD2 dizzy will work on an OBD1 car because OBD1 dizzy has the Crank Fluctuation Sensor inside the Dizzy and OBD2 motors have it on the drivers side of the block instead of in the dizzy. Wiring is different as well.
What motor do you have?


you are correct. i ended up buying a new dizzy and started right up.