Civic-EG.com Forum 3.3.1

- Mon Apr 02, 2012 8:27 am #300637 Nice build man! I am currently doing something similar, I have b18c4 engine, will be putting PR3 pistons and ITR cams with Skunk springs. Have you measured valve to piston clearance when building the engine? Have you calculated the compression ratio?

In order to survive you've got to earn your respect
The only lessons that you learn are from things that you regret

- Wed Apr 04, 2012 6:45 am #300885


@chris.. I havent calulated the compression ratio, as I didnt do the swap and engine build by myself... But I now that the compression ratio is similar as stock integra type r-s or even a bit higher.

Liqui Moly Racing Team

- Thu Apr 05, 2012 9:35 am #301018 http://postimage.org/image/yzya1rwzd/

Liqui Moly Racing Team

- Thu Apr 05, 2012 9:37 am #301019 ______________________________________________________________

Liqui Moly Racing Team

- Tue Apr 17, 2012 9:16 pm #302153 ____________________________________________________________

Liqui Moly Racing Team