Post YOUR Sedan here

What color should I paint the valve cover?

3
13%
4
17%
2
9%
2
9%
2
9%
4
17%
6
26%
User avatar
By xwhitchx
#260808 Anyways, so now my car has a freshly rebuilt tranny in it, and jdm engine with all new seals and gaskets with about 35-45k mils on it with a new timing belt and water pump. 0 mils on the new stage 1 clutch and 8lb fly wheel. Brand new D16z6 dizzy, cap rotor and 10mm wire set. also when over the engine and tranny and starter with a wire brush by hand to clean it all up.

So all I need now are some lil things for in side of the car and it will be like new.
User avatar
By xwhitchx
#260809 Yesterday I when to the pick-a-part, and found a civic that only had the ecu missing.... thats all that was gone. So I got a lx/ex cluster with 160k mils on it with rpms, a gray arm rest with ash tray, 4 door rear wing with leg light, clock, H emblems, and other lil things.

So if any one wants to buy the cluster, arm rest or wing let me know.
User avatar
By 1ACarlos
#260823 Nice sedan
User avatar
By Blk95coupe
#260937 Get a better Exhaust manifold you will thank me.
User avatar
By xwhitchx
#260970
Blk95coupe wrote:Get a better Exhaust manifold you will thank me.
like a y8 one? =P
User avatar
By Blk95coupe
#261382
xwhitchx wrote:
Blk95coupe wrote:Get a better Exhaust manifold you will thank me.
like a y8 one? =P

Or a Z6
User avatar
By xwhitchx
#263422 Some New Updates:

Had an overheating problem: Changed the radiator, and got a slim fan.

When It was hot out side the brake peddle would sink to the ground: Got a new Brake Master Cylinder, also I have all new rotors and brakes on there way.

Clutch Master Cylinder was leaking in to the car: Got a new one and clean the line out of all the old black fluid.

Car would star up and die, there was no noise from the fuel pump: Got a new fuel pump, now its load as hell lol.

Didn't have v-tec: got a p28 ecu

Ill get some pictures of the engine bay soon.

I really don't know what I have not replaces on this car =P
User avatar
By Ajax1989
#263880
xwhitchx wrote:
94_jdm_ferio wrote:i think u should sell me your headlights :D

but looks nice man!
vtec ftw!!!


lol my plastic "jdm" lights with hids in them =P

and thank you, all I need now is a p28 ecu and Im all done.


yea them headlights :D