yoshi06 f22 powered 94 civic

Post YOUR Coupe here
 Reply

By yoshi06
- Tue Aug 19, 2014 4:06 am #348000 Im never home in time while the sun is out lol
here is one

Image

been slacking!!

By yoshi06
- Wed Sep 03, 2014 3:07 am #348437 Installing my new axles tomorrow and just been in and out of town the last 2 weeks.

I looked and looked for center caps over the last years and nothing so I decided to mock something up and then I will go get them made so here is a preview!
Image
how the car is sitting waiting om axles so I can slam it
Image

Car In the garage for now
Image

By Axix23
- Tue Sep 09, 2014 11:17 am #348583 awesome bay! :thumb:

By yoshi06
- Mon Sep 22, 2014 6:32 am #348803 Thanks for the comments fellas.

Car needs a dam throw out bearing.. Every part in this car is new and it started making noise and more I'm having clutch problems so that's next to do.
That's the next project followed by finishing the exhaust.

On the plus side I was messing with the tune and I was able to make a full pass with my afr's not getting too crazy. Car feels under powered but I only slightly touched the ignition tables. Working on finishing the intake manifold with new nitrous hard lines and then I will get the car dyno tuned.
Here is the most current pic enjoy!
Image

By yoshi06
- Sun Nov 09, 2014 4:38 am #349745 After working 35 days in a row with no sleep and a lot of work hours I get a full week to myself and the car!!

This week I will try to get everything I need to get done.
New throw out bearing this will be my 3rd one wth Confused
Swap intake manifolds
finish nitrous setup
Run electrical for nitrous
and then its time for a tune!!
Pray that it holds together going for a pretty big shot
Enjoy the updates

Image

Image
Image

By yoshi06
- Mon Dec 29, 2014 4:51 am #350620 After working 35 days in a row with no sleep and a lot of work hours I get a full week to myself and the car!!

This week I will try to get everything I need to get done.
New throw out bearing this will be my 3rd one wth :?
Swap intake manifolds
finish nitrous setup
Run electrical for nitrous
and then its time for a tune!!
Pray that it holds together going for a pretty big shot
Enjoy the updates
Image
Image
Image

By yoshi06
- Mon Dec 29, 2014 5:17 am #350621 Car spun a bearing but it didn't mess up the crank or rods... it's back up and runnjng
User avatar

By teal_dx
- Tue Jun 16, 2015 2:13 pm #354196 How'd the Nitrous install go? Did you get it done before the bearing spun?

Also submitted your car for ROTM :thumb: http://civic-eg.com/viewtopic.php?p=354195#354195

Re: yoshi06 f22 powered 94 civic

By yoshi06
- Thu Sep 17, 2015 4:31 am #355845 Sorry for the delay just been busy.
nitrous did get installed and I tested on a 50 shot . It worked but I didn't spray long as the car was not tuned.

Also I didn't want to skip what happened in march......







Image
 Reply
Return to Your Ride - Coupe