- Tue Jan 24, 2012 11:07 pm
#291795
Ok so here it is my 95 EJ1.
Heres my build list:
WHEELS AND TIRES:
15'' MOTEGI'S
HANKOOK TIRES VENTUS CONCEPT 195/55/15
SUSPENSION:
SUSPENSION TECHNIQUES FRONT AND REAR SWAY BARS
FRONT 3 POINT AND REAR UPPER STRUT TOWER BARS
EIBACH PRO KIT
ASR BRACE
C-PILLAR BAR
ENGINE:
Block D16Y8:
Bored .020 over
Decked
JE Pistons 75.5 mm 10:5:1comp
Eagle h-Beam rods
Stock crank had grinded, micro polished, balanced
New honda oil pump.water pump, rear main, all new seals
Gates racing timing belt
OEM Honda 75mm head gasket
ACl race bearings
ARP head studs
Hasport engine mounts
Head D16Z6:
Head has been resurfaced
Full port and polish
Ferra valves
3 angle valve job
Crower springs and steel retainers
Crower Stage 2 cam
Crower cam gear
Skunk2 Pro Series intake port matched and dowel pinned to head
Skunk2 70mm Alpha throttle body port matched to intake
Hondata intake gasket port matched to head and intake
AEM fuel rail
AEM adj. fuel pressure regulator
AEM Wideband O2 sensor and gauge
Injector Dynamics 725cc injectors
NGK plugs and wires
Walboro 255 fuel pump
Hondata S300
Full Dyno tune(144hp-122tq) with crappy header, small air intake, a/c and power steering still installed on 93octane.
AEM DRY FLOW INTAKE
EBAY CATBACK 2.5 PIPING
EBAY 4-2-1 STAINLESS HEADER
EXEDY OEM DISC AND PRESSURE PLATE
EXEDY 10.5LB. FLYWHEEL
EXTERIOR AND LIGHTS:
HONDA PAINT PHANTOM GREY
OEM HEADLIGHTS(CUSTOM PAINTED BLACK HOUSINGS)
OEM TAILIGHTS
VISION AMBER CORNERS
JDM STANLEY SIDE MARKERS
XENTEC 8000K HID KIT
SPOON STYLE MIRRORS
MUGEN STYLE LIP
JDM CIVIC AND COUPE BADGES
JDM THIN SIDE MOLDINGS
JDM DEPO YELLOW OEM FOGLIGHTS
FRONT LICENSE PLATE CAPS
BENEN REAR TOW HOOK
INTERIOR:
JDM SHIFT BOOT
JDM ARMREST
JDM OPTIONAL AUDIO CONSOLE
JDM ITR SHIFT KNOB
JDM MUGEN PEDALS
PERFORATED VINYL DOOR INSERTS
VINYL COVERED REAR DECK
CUSTOM SEAT COVERS
CUSTOM ARM REST
CUSTOM I PHONE MOUNT ON STEERING COLUMN
AUDIO:
PIONEER TOUCH SCREEN HEAD UNIT
JL 6 1/2 IN DOORS AND REAR DECK
2 12'' JL SUBS
ROCKFORD FOSGATE PUNCH 250(RUNNING THE SUBS)
ALPINE 50X4(RUNNING THE FRONT AND REAR SPEAKERS)
AUDIO CONTROL EPICENTER(TO ADJUST THE FREQ. OF THE SUBS)
1 FARAD STINGER CAP
I HAVE ADDED XTC SPEAKERS BAFFLES TO ALL 6 1/2'S
I HAVE APPLIED HUSHMAT TO THE ENTIRE INSIDE OF THE CAR.
This is what it looked like the day i got it 7 years ago!
Heres what it looks like as of now!
Heres my build list:
WHEELS AND TIRES:
15'' MOTEGI'S
HANKOOK TIRES VENTUS CONCEPT 195/55/15
SUSPENSION:
SUSPENSION TECHNIQUES FRONT AND REAR SWAY BARS
FRONT 3 POINT AND REAR UPPER STRUT TOWER BARS
EIBACH PRO KIT
ASR BRACE
C-PILLAR BAR
ENGINE:
Block D16Y8:
Bored .020 over
Decked
JE Pistons 75.5 mm 10:5:1comp
Eagle h-Beam rods
Stock crank had grinded, micro polished, balanced
New honda oil pump.water pump, rear main, all new seals
Gates racing timing belt
OEM Honda 75mm head gasket
ACl race bearings
ARP head studs
Hasport engine mounts
Head D16Z6:
Head has been resurfaced
Full port and polish
Ferra valves
3 angle valve job
Crower springs and steel retainers
Crower Stage 2 cam
Crower cam gear
Skunk2 Pro Series intake port matched and dowel pinned to head
Skunk2 70mm Alpha throttle body port matched to intake
Hondata intake gasket port matched to head and intake
AEM fuel rail
AEM adj. fuel pressure regulator
AEM Wideband O2 sensor and gauge
Injector Dynamics 725cc injectors
NGK plugs and wires
Walboro 255 fuel pump
Hondata S300
Full Dyno tune(144hp-122tq) with crappy header, small air intake, a/c and power steering still installed on 93octane.
AEM DRY FLOW INTAKE
EBAY CATBACK 2.5 PIPING
EBAY 4-2-1 STAINLESS HEADER
EXEDY OEM DISC AND PRESSURE PLATE
EXEDY 10.5LB. FLYWHEEL
EXTERIOR AND LIGHTS:
HONDA PAINT PHANTOM GREY
OEM HEADLIGHTS(CUSTOM PAINTED BLACK HOUSINGS)
OEM TAILIGHTS
VISION AMBER CORNERS
JDM STANLEY SIDE MARKERS
XENTEC 8000K HID KIT
SPOON STYLE MIRRORS
MUGEN STYLE LIP
JDM CIVIC AND COUPE BADGES
JDM THIN SIDE MOLDINGS
JDM DEPO YELLOW OEM FOGLIGHTS
FRONT LICENSE PLATE CAPS
BENEN REAR TOW HOOK
INTERIOR:
JDM SHIFT BOOT
JDM ARMREST
JDM OPTIONAL AUDIO CONSOLE
JDM ITR SHIFT KNOB
JDM MUGEN PEDALS
PERFORATED VINYL DOOR INSERTS
VINYL COVERED REAR DECK
CUSTOM SEAT COVERS
CUSTOM ARM REST
CUSTOM I PHONE MOUNT ON STEERING COLUMN
AUDIO:
PIONEER TOUCH SCREEN HEAD UNIT
JL 6 1/2 IN DOORS AND REAR DECK
2 12'' JL SUBS
ROCKFORD FOSGATE PUNCH 250(RUNNING THE SUBS)
ALPINE 50X4(RUNNING THE FRONT AND REAR SPEAKERS)
AUDIO CONTROL EPICENTER(TO ADJUST THE FREQ. OF THE SUBS)
1 FARAD STINGER CAP
I HAVE ADDED XTC SPEAKERS BAFFLES TO ALL 6 1/2'S
I HAVE APPLIED HUSHMAT TO THE ENTIRE INSIDE OF THE CAR.
This is what it looked like the day i got it 7 years ago!
Heres what it looks like as of now!
Last edited by PhantomEJ1 on Thu Jul 19, 2012 11:34 pm, edited 2 times in total.
[/img]