Page 1 of 1
what cams should i use
Posted:
Wed Jan 07, 2009 2:09 pmby 95boostedex
i currently have itr cams and i have fully built turbo ready b16a motor and fully built head now im down to what cams to use any thoughts?
should i buy different or keep these itr ones..
im looking to be running about 12-15lb boost
hopefully be in the 350 to 400hp range
Posted:
Wed Jan 07, 2009 4:25 pmby ej2rey
I would inquire on sum turbo cams. I wouldn't run itr cams on a turbo set up. They mainly for all motor applications.
Search the web you'll find a few brands the sale turbo cams.
There's one company that is my one and only favorite company, crower. I've used their cams for both my d and b turbo set ups.
Posted:
Wed Jan 07, 2009 11:57 pmby 95boostedex
thanks for the advise
Posted:
Fri Jan 09, 2009 9:52 pmby TurboHatch
due to the "low" power goal you have you dont even need to worry about cams, a bone stock head and cams can make those numbers with ease. I am using the CTR cams and on pump gas and a conservative tune i made 510 whp.
Posted:
Fri Jan 09, 2009 9:56 pmby ej2rey
TurboHatch wrote:due to the "low" power goal you have you dont even need to worry about cams, a bone stock head and cams can make those numbers with ease. I am using the CTR cams and on pump gas and a conservative tune i made 510 whp.
WOW!
Posted:
Sat Jan 10, 2009 6:00 amby MASTERBUILDER
TurboHatch is correct. i would invest in dual valve springs with retainers
Posted:
Sun Feb 08, 2009 6:19 amby Josiah
TurboHatch wrote:due to the "low" power goal you have you dont even need to worry about cams, a bone stock head and cams can make those numbers with ease. I am using the CTR cams and on pump gas and a conservative tune i made 510 whp.
was this on a sleeved block?