Page 1 of 2
I want to keep my fogs!!! What FMIC are you running?
Posted:
Mon Jun 03, 2013 1:37 amby cjw_89
I want to know what you guys are running with your fog setups? I previously had my fogs in then went with boost and now piping is in the way
. I have a lead on an evo4 fm if with inlet and out let pointing down. I think I can work with it,but I need your input guys/girls.
Posted:
Mon Jun 03, 2013 3:47 amby HeikDiesel
Dual backdoor or route the piping above it
Posted:
Tue Jun 04, 2013 9:18 pmby Civic_HatchSI
Your best bet is to buy just the piping you need and cut/weld it to where you want the piping to be ran. I bought my piping from cx racing on ebay, very high quality piping for the price, can't complain.
http://www.ebay.ca/itm/CXRacing-2-5-Tur ... 24&vxp=mtr
I am running fog lights, it clears no problem
Posted:
Sun Jun 09, 2013 12:04 pmby cjw_89
What fmic are you running
Posted:
Sun Jun 09, 2013 1:49 pmby Civic_HatchSI
cjw_89 wrote:What fmic are you running
go-autoworks
http://www.go-autoworks-store.com/golain.html
Posted:
Mon Dec 09, 2013 10:30 pmby ihavesol93
mine is directly 90 degrees off of the intercooler to go straight back to the turbo and the intake.
Posted:
Tue Dec 10, 2013 11:35 amby Civic_HatchSI
^^^ Doesn't your piping rub on your torque mount? I use to have mine running that way but it rubbed so bad it destroyed my piping on the passenger side.
Posted:
Wed Dec 11, 2013 6:43 amby ihavesol93
no, the frame is cut out in a circle where the piping goes back into the bay. at first i had an issue with the coupler rubbing on the bumper and then i dremeled out the bumper to clear the coupler.
Posted:
Wed Dec 11, 2013 6:49 amby ihavesol93
im also not running the torque mounts, car didn't have them when i got it.
Posted:
Thu Dec 19, 2013 10:51 pmby Civic_HatchSI
ihavesol93 wrote:im also not running the torque mounts, car didn't have them when i got it.
Oh ok, I run them on mine.
Posted:
Sat Feb 22, 2014 11:33 pmby cjw_89
I'm looking to keep my grill ihavesol93. Anyone else care to share pic and specs?
Posted:
Mon Feb 24, 2014 2:54 pmby jefferydclark
cjw_89 wrote:I'm looking to keep my grill ihavesol93. Anyone else care to share pic and specs?
you'll likely have to trim the grill even if you keep it. a drimmel tool will be your friend.
Posted:
Sun Mar 02, 2014 10:25 pmby cjw_89
I don't mint the trim long as full grills intact.
Posted:
Wed Mar 12, 2014 3:52 pmby fijiblu
Fogs are nice but not for me!
Posted:
Sun Sep 28, 2014 2:01 amby gt35civic
what size coolers are you guys running? i was going to get a 600x300x76 for mine, looks like it will fit pretty easy
