Post YOUR Hatchback here
By EJ1_MK
#301703 Super clean really digging the seats too. :thumb:
By sennz
#301717
rootbeer_eg wrote:i dont know if you posted what brand of coilovers you have
but what type of coilovers did you put on your civic??


The manufacturer is called HSD. Amazing bit of kit tbh!
User avatar
By Jr_DSantos
#301768
sennz wrote:
rootbeer_eg wrote:i dont know if you posted what brand of coilovers you have
but what type of coilovers did you put on your civic??


The manufacturer is called HSD. Amazing bit of kit tbh!


yea HSD :D i got a pair also waiting to be installed, check out my build for pics
By sennz
#301837 HSD's, + a 15"x7" wheel + Toyo T1R's = Car is stuck to the ground :P


Weather today was perfect for washing. So I took this time to clean my mums car, and got some snaps of the civic! - Slowly learning how to use the camera in a bit more detail now!

Mums car before;
Image

After, cba to clean glass and tyres;
Image


Now a couple of my car;

Image

Image


She definitely deserves some B series action!
User avatar
By RednessblAze
#301855 Nicely slammed :D I really dig the color, both rims and body. Goes really nice together :D
By sennz
#305118 Image


Got a nice pay rise at work. So with a bit of saving, she is going to see a K20a2 over the winter period. As tbh, the shell is immaculate, so it doesn't deserve anything less tbh.

This also gives me ALOT of time to research everything needed.


In the meantime, Tattoos and saving :)
User avatar
By *Majik*
#305707 I love the blue, and the seats were a good fine
Nice work!!!! :thumb:
User avatar
By dbrooks
#305708 Tattoos are good :thumb:

I'm working on my full sleeve
By sennz
#314951 Just got these ;)

Image

going on this

Image
Image


Currently undergoing a engine swap at the moment.

K power ;) Hoping to see around 250-260bhp after a little tune. Hopefully it is up and running and ready to get tuned this upcoming Friday!
User avatar
By Punksz6
#314968 Dam cant wait to see, tuned in for this!!! :thumb:
By Paroykos
#315850 Curious if you wouldn't mind detailing the installation of the Evo8 seats? I'm considering these seats as well as they match my car and offer increased stability.
User avatar
By ite
#315869 nice , i love the color combi, i want more more, weeee
you can try those new rims, . :thumb:
User avatar
By Apexracing
#315873 love me some K :thumb:
By sennz
#316116
Paroykos wrote:Curious if you wouldn't mind detailing the installation of the Evo8 seats? I'm considering these seats as well as they match my car and offer increased stability.


Find yourself a set of DC2 / ITR recaro seat rails.

You will find that when attempted to bolt the rails to the seats, that only one bolt lines up on each side, you simply just have to drill a extra couple of holes in the DC2 rails, bolt them down. BOOM flush fit.

I'll upload some pics of what I did.

Basically, the front bolt holes line up perfectly, after lining them up and bolting them in a little bit, you can finally mark up where you have to drill the extra hole needed to secure the rail to the seat.

There is also a part you have to grind down to make the rail sit inline too, which is shown in one/two of the pictures below.

Image

Lining up the front, you'll find you have to grind out/off some metal. I used some sort of file to do this.

Image

Image

You can now line up the hole needed to bolt in the rail securely

Image

Image

Boom DONE

Image

If I remember correctly, the front part of the rails, when full extended out, as long as they are inline with each other, you will have near enough perfect fit into your EG.

Hope this makes some sort of sense, any more questions just ask.
By leonsel
#316156 Really nice harvard blue EG there. Like it. :thumb: