Black EG4 B16 project, UK

Post YOUR Hatchback here
 Reply
User avatar

By EGCiviCKid
- Tue Jun 12, 2012 5:39 pm #308023 UPDATE

Removed the front and rear brake setup
Image


Removed the old rusty exhaust
Image


My MB6 vti brake setup finally arrived.....with servo, cables etc :thumb:
Image


A few questions before i fit these:
1. they all seem to have wires coming from them.. what are they for and do i need them?

2. how hard is it to bleed the brakes? should i get it done professionally?

Thanks :thumb:

By Gunni
- Wed Jun 13, 2012 12:48 pm #308105 1. ABS sensors - no u dont need them

2. no .. a 5 year old could do it..
User avatar

By EGCiviCKid
- Sat Sep 01, 2012 10:51 am #314769 UPDATE

Painted the manifold and p/s pump brakets
Image

stripped interior and fitted auto sir interior loom and did the manual convertion on it
Image

Bought a vti engine loom and did the nessesary wiring Injectors,dizzy,altornator and extended iat
Image

Bought and installed a chipped p28 with b16 basemap
Image

bought a civic vti exhaust and cat along with a tannabe hyper medallion back box for now ..all installed
Image

Filled her up... and she started! had to wire fuel pump to ignition as there were problems with the loom.
Image

began to fit my new interior, done the diy on the door cards and carbon dash.
Image
Image

Painted the rear calipers on my vti brake setup
Image

Bought some new D2 LCAs
Image
User avatar

By EGCiviCKid
- Fri Oct 12, 2012 4:30 pm #317808 bought some D2 toe arms
Image

Fitted rear Break Setup
Image

Put on a flushed tail gate as mine was starting to rust and also put the tannabe back box on
Image

Fitted a Momo race wheel and gear knob
Image

Finished of the interior, put seats in and re upholstered the armrest in red leather.
Image
Image

Installed front and rear strut braces
Image
Image

Bought a new induction kit and few dress up bits
Image

Bought and fitted some 96 spec DC2 alloys wrapped in TR1s
Image
 Reply
Return to Your Ride - Hatchback