HAFIL0_EG's Project EG Roll-Cam cover fresh paint p.16

Post YOUR Hatchback here
 Reply
User avatar

HAFIL0_EG's Project EG Roll-Cam cover fresh paint p.16

By HAFIL0_EG
- Wed Mar 16, 2011 12:44 pm #244236 Hey all my name is Marty from Perth, Western Australia. i'm some what new to the site loving the EG's posted up here n all the write ups to help me with ma project EG roll :D

Just bought a silver EG4 hatch for a daily, it's a manual D15B twin carb motor, the car was stock as a rock when i bought it apart from 14" CSA rims a "dodgeyphonics" head unit and mismatched 4" front speakers

I currently work at a wrecking yard and am lucky enough to have a boss that ships in front cuts from Japan every other month and came across a JDM EG6 SiR front cut for $1000 :D also managed to source a clean set of 15" RAYS Gram Lights with rubber for $170 :headbang:

SPECIFICATIONS/MODIFICATIONS:

ENGINE:
- 0BD0 D15B twin carb - original engine
- EG6 0BD1 B16A - upgrade engine
- P30 ecu
- Apexi Neo AFC
- Sandblasted and painted valve cover in red crinkle
- B20B exhaust manifold and oxygen sensor
- Skunk 2 cam seal
- full factory exhaust system with cannon rear muffler
- Spoon reservoir covers

TRANSMISSION:
- EG6 5 speed manual transmission
- EG6 shifter linkages and shifter

EXTERIOR:
- JDM SiR front bar w/ lower lip and front air dams cut out
- Spoon power mirrors in black ABS plastic
- factory mud guards front and rear
- JDM flat side markers
- rolled rear arches
- cheap respray from previous owner to hide front end damage
- front and rear wiper arms repainted in matt black
- matt black bonnet badge
- Domo on rear tow hook
- rad support behind front bar sprayed matt black
- twin JDM horns behind front bar

INTERIOR:

- JDM EG6 SiR white face cluster
- rosary beads hanging from rear view mirror (required filipino modification)
- Sony CD head unit
- 6.5" MB QUART split system speakers (front))
- 6.5" MB QUART co-axial speakers (rear)
- Personal leather steering wheel
- "race" aka grip tape pedals
- Civic Type R gear knob
- FTO front seats
- broadway mirror
- 2002 Honda CRV map light
- rear cargo light
- headliner re-trimmed in black vinyl
- dash and panels satin black re-trim
- gun metal grey plastics respray
- Pioneer 12" sub woofer
- MTX amplifier
- red LED globes in dash cluster and climate control unit

SUSPENSION:
- all OEM suspension
- lovells lowered springs
- JDM EG6 SiR front strut bar
- JDM EG6 manual steering rack

BRAKES:
- standard EG4 discs front (to be replaced with EG6 SiR discs and calipers)
- standard EG4 drums rear (to be replaced with EK rear discs)

WHEELS:
- 15"x6.5" RAYS Gram Lights (white)
- tires 195/55/r15

- 16"x7" Buddyclub P1 Racing (Gun Grey)
- Advan Neova 205/50/r16

I hope that you like the beginnings of Project EG Roll will keep you up to date with latest mods and pics


this is how the EG Roll looked the day I bought it
Image

15"RAYS Gram Lights i picked up for $170 from my work :thumb:
Image

rollin on the Gram Lights lookin like a 4WD, needs to be lowered ASAP!
Image :woot:
Last edited by HAFIL0_EG on Tue May 28, 2013 1:01 pm, edited 31 times in total.
User avatar

By HAFIL0_EG
- Wed Mar 16, 2011 1:36 pm #244238 Got bored the other day n decided to fit "race" pedals to the hatch n a pair of aftermarket JDM horns.

Here are my $10 "race" pedals made from grip tape :D
Image

Aftermarket JDM horns I scored from work :P
Image

Fitted up n working on the hatch, gonna spray the rad support matt black soon to neaten up the front end
Image

A pic of the front cut I'm buying from work for $1000 :thumb:
Image

B16 w/ 5speed n just about everything i need for the swap :D
Image

hope everyone likes my project and what i lined up for it
Last edited by HAFIL0_EG on Sun Mar 20, 2011 10:26 am, edited 2 times in total.
User avatar

By HAFIL0_EG
- Wed Mar 16, 2011 10:25 pm #244326 thanks, all i need now is DC2 rear disc conversion b4 i start the B16 swap :thumb:
User avatar

By Eg6H2D
- Wed Mar 16, 2011 10:54 pm #244329 Wish i had RHD!! grrr! good find tho! loking good!!!
User avatar

By ron_kimi
- Thu Mar 17, 2011 2:55 am #244375 nice hatch and good project :)
User avatar

By rtegra92
- Thu Mar 17, 2011 3:38 am #244391 First Ill tell you where you went all WRONG.....
on your driveway your pavers are in a 90degre heringbone instead of a 45 degree hering bone pattern.......GOSH!!!!

as for the civic well thats another story , love the silver color , and killer wheels, and im definitely doing that to my pedals.. period
User avatar

By 92_eghatch
- Thu Mar 17, 2011 5:47 am #244422 thought about doing that to my pedals as well. just kind of lazy i guess..
User avatar

By HAFIL0_EG
- Thu Mar 17, 2011 12:02 pm #244449 thanks on the comments guys, as for the paving i didn't have much say in the matter as i'm only rentin out the place.

LATEST MODS

- Diego plush toy on the rear tow hook :hehe:

More pics of the car and mods soon....
User avatar

By Ecc0
- Thu Mar 17, 2011 12:29 pm #244456 Looks like the start of a real nice build will be good to see this up and running, good luck and keep the pics coming.
User avatar

By HAFIL0_EG
- Thu Mar 17, 2011 12:46 pm #244459 Thanks Ecc0, yeah more pics will come up soon. :)

Might do some interior colour coding, light grey trim is a lil bland for my liking. Thinking of going black vinyl re-trim and gun metal grey respray on all the plastics n red LED's but not sure how it would look with JDM white cluster
User avatar

By HAFIL0_EG
- Fri Mar 18, 2011 2:23 pm #244665 Just took a pic of my latest mod, rocking Diego on my rear tow hook lol i wanted to throw Dora on the back but my fiancé's daughter beat me to Dora at the shop :hehe:

Image
Go Diego Go lol :P
User avatar

By kapow
- Fri Mar 18, 2011 2:29 pm #244668 Lucky find! You should put that front bumper on yours, that's rare with the side mouldings.

Also you have a strut bar, I didn't get one with my swap :(
User avatar

By HAFIL0_EG
- Fri Mar 18, 2011 2:43 pm #244670
kapow wrote:Lucky find! You should put that front bumper on yours, that's rare with the side mouldings.

Also you have a strut bar, I didn't get one with my swap :(


Thanks :) i was planning to but i wanna delete the mouldings as they look they are not OEM fitment, over 10mm thick

yeah i was cheering when i spotted the strut bar in the front cut :woot:

lined up the front cut with my boss at work for $1000 :P

also lined up my Gram Lights thru work for $170 the set :thumb:

just need to source disc rear conversion b4 i start to do the b16 swap
 Reply
Return to Your Ride - Hatchback