My project 94 eg hatch

Post YOUR Hatchback here
 Reply
User avatar

My project 94 eg hatch

By d16drey
- Sun Nov 07, 2010 2:05 pm #221969 Project 1994 eg hatch

got this car from a good friend..been drooling on it for years..then finally..he decided to sell it..yahoooooo.. :D

needs a major make over.
fix everything..
door openers
window mechanism
headlight wirings.
change sidemirror to a spoon sidemirror
change hood to a cf hood
from 13 inch steel rims to rota slipstream spoon copy rims
installed spoon chin on it
installed spoon windshield sticker
added bosch horn.. yes it doesnt have a horn.. :(
and it needs a major paintjob :(
etc
etc
etc
its a very long list :(

hello boosted d16a eg hatch :)

Image

Image

Image

but my wife doesnt want a FI anymore..i remove the kit and so
say hi to cp pistons,crower,and supertech,arp etc etc :D

d16a engine
d16a head ported head by my friend and ported and builder sl@sh
supertech valve springs and retainers
crower stage 3 cams
cam gear (no brand, taiwan cam gear)
cp piston 10. something c.r
oem rods
arp connecting rod bolts
65 mm JG trottlebody
b16 intake manifold (modified to fit d series)
competiion clutch (double d, 6 pack)
Brodeth 4-2-1 headers
Brodeth 24inch scav
spoon full coilovers
DIY 3 inch CAI
jdm p08 ecu rechipped.will be tuned with crome..

Image

Image

Image

Image

Image

been working with the head for a couple of weeks..then when i pop the hood.booom this blew my eyes..my sleeves got rust on it.oh my oh my :(

Image

i completely remove the block from my bay..then sent it to the hospital :)

Image

time to clean mah y8 mani

Image

before

Image

after

Image

my skunk2 style photo :D

Image

time to do some portmatching for this baby

Image

to be cont...

:D

negative comments are welcome

help me to fix this dream car :D
Last edited by d16drey on Wed Oct 26, 2011 6:13 pm, edited 8 times in total.
User avatar

By d16drey
- Sun Nov 07, 2010 2:24 pm #221971 forgot to add this :D

spoon eg6 full coilovers..got this for a very good price..little under $200 :)

Image

Image


and my diy CAI.. :)
why diy,, cuz i dont have $$ to buy the real one :(

Image

to keep those dirt hitting my filter
my diy air filter cover heheh :D
(its a cookie box..just painted it flat black :)
i know i know it doesnt look good :(

Image

Image

to help me stop :)

Image



to be cont.. :)
User avatar

By d16drey
- Sun Nov 07, 2010 3:11 pm #221972 my friend/builder (ralf aka sl@sh) did some port work for my head..just wanna share his work

work : head porting , for flow improvements and efficiency
installation of Supertech valvetrain (springsand retainers)

Image

dirty workbench, background is his first and fave cylinderhead and a vw cylinderhead lol and some helmets and spay gun

Image

some closer look

Image
User avatar

By d16drey
- Sun Nov 07, 2010 3:21 pm #221973 my fave shot.. its my Skunk2 style shot..

i think its still on their site,

Image


like always.. light can show the contours of the portwall.. short turn and roof

all that, plays a big part in flow efficency, straight is not always better...


another side of the skunk2 style photoshot hahaha

hopefully the 1 hand in camera one hand on a lamp shot.. shows a good detail on the port contours sa INtake

Image
User avatar

By familyEGuy23
- Sun Nov 07, 2010 3:24 pm #221974 Those coilovers look sweet!!! :thumb:
DIY FTW!!! by the way what materials did you use to make your CAI?
User avatar

By d16drey
- Sun Nov 07, 2010 3:27 pm #221976 now for the rear end (exhaust)

Image

cant improve one side of the traffic jam.. and expect good results..
the exhaust recieves the same attention ofcourse.. " a certain balance, is worth gold"

a closer shot of the exhaust port (well one of them)

note some areas are barely carved/touched , for a reason, there are places in the head/ports that are already too big or out of shape and cant be fix by enlarging.. best bet is to aid it and help it..

Image
User avatar

By d16drey
- Sun Nov 07, 2010 3:31 pm #221977 ofcourse the exhaust gets the Skunk2 photoshot also hehe

Image

take note, the exhaust ports on B and D are directional..

straigthening them will ruin flow..

the exhaust for 1-2 is a left hander and the 3-4 is a right hander (if u look out)
or vice versa from the chamber (hope that helps)

so far the things needed to be done are:
stem height checking (installed height) will do this after the second trip sa machineshop
for mirror surfacing (improved gasket seal) will take pics of that..

and ofcourse installation of (supertech's and all)

hopefully in a few days or so..

to be cont..

:)
Last edited by d16drey on Sat Nov 13, 2010 2:22 am, edited 2 times in total.
User avatar

By d16drey
- Sun Nov 07, 2010 3:38 pm #221979
familyEGuy23 wrote:Those coilovers look sweet!!! :thumb:
DIY FTW!!! by the way what materials did you use to make your CAI?


thanks bro :)
diy cai
2 pcs used 3 inch inlet diameter short ram intake tubes--got it for $20
and for the rubber connector..3 inch truck radiator hose :)
2 pcs clamp :)
User avatar

By bumpin
- Thu Nov 11, 2010 9:42 pm #222601 i wish my sohc was FI :hehe:


nice project drey!
User avatar

By d16drey
- Sat Nov 13, 2010 1:45 am #222724 5ive_on_the_floor sure jet..once the built is finish :)

Bumpin thanks you pare :)
User avatar

By d16drey
- Sat Nov 13, 2010 1:47 am #222725 my brodeth headers with 2.5 inch inlet collector

Image

my 24 inch with 2.5inch inlet diameter scav by brodeth

Image

to transfer those hp to the ground :D
my competition clutch,double d and 6 pack

Image

Image
User avatar

By Punksz6
- Sat Nov 13, 2010 5:36 pm #222781 Bad Ass Parts!! :)
User avatar

By d16drey
- Tue Nov 16, 2010 7:01 am #223144 thanks for viewing Punksz6 :)
Last edited by d16drey on Sat Dec 04, 2010 4:06 pm, edited 1 time in total.
User avatar

By 1ACarlos
- Tue Nov 16, 2010 5:28 pm #223176 Looks like it's coming out pretty good. Can't wait to see the finished product.
 Reply
Return to Your Ride - Hatchback