- Wed Jan 18, 2012 5:47 am
#290733
So I got my Gsr swap in over Christmas break. It started up the first time and ran great!! The problem I ran into was that I found out it had a bad input bearing AFTER I finished the swap. Thus, the task of unbolting the tranny and taking it all apart began. I got the bad bearing out and am just waiting on the bearing to come in the mail from Honda.
Lesson learned: Check bearings in bought transmission BEFORE swap.
I'll post pictures when I get around to it.
- Sat Mar 17, 2012 3:23 am
#298541
Installed an Apexi WS2 today!!
It's a used system, the tip was bent so I welded one on temporarily. I need to find a stainless tip!
Also, picked up a Nikon D5000 today so I'll be taking some pics with it!!
It's a used system, the tip was bent so I welded one on temporarily. I need to find a stainless tip!
Also, picked up a Nikon D5000 today so I'll be taking some pics with it!!