Post YOUR Hatchback here
User avatar
By blk92hb
#306259 well granny brought half of my parts today

Image
Last edited by blk92hb on Sat May 26, 2012 7:53 pm, edited 1 time in total.
User avatar
By dbrooks
#306261 Nice! :thumb: :thumb:
User avatar
By blk92hb
#306489 got the lines on
Image
but i didnt put the brakes on beacuse i think i will need an alignment after i install them
User avatar
By blk92hb
#331186 Ok so I haven't been on here in awhile, I got the front brakes on and I love them, I also changed the rear trailing arm bushings. I haven't really done anything else to the hatch except basic maintenance.
User avatar
By lonemeno
#335620 you last post tells me that you oil is way due :chair:
User avatar
By blk92hb
#335633 Yea well you know that I haven't done anything but maintenance, but i did just do the oil change and trans fluid.
User avatar
By blk92hb
#359544 I'm just now updating this, but I blew a hole in my block and ended up selling my hatch. :cry:
As of now I bought a stock 99 Civic LX with a weak D16Y7, and slowly building a poor mans R. I have a GSR block with my B16A head, Skunk2 rods, and floating USDM Type R pistons. I'm wanting to build to motor for 200+ hp for a nice daily driver.

This was the last time I got to be with my hatch and was waiting on the trailer to pick it up.
Image
Image
Image

Now for the carnage, the hole was on cylinder #3, the rod split in half and stuck in the crank.
Image
Image
Image

This is half of the big end of the rod, it was completely smashed.
Image
The rod bearing is stuck
Image

This is the rod cap that came off because a rod bolt stretched, and broke.
Image
Image
Image
Image
Image

The piston took some damage as well and it even cracked almost all the way around
Image
Image
Image
Image
Image
Image
User avatar
By TrailerTrash
#359547 wow thats some carnage! :shock:

welcome back :thumb: :thumb: :thumb:
User avatar
By blk92hb
#359548 Thanks man. I haven't been able to update do to not having a computer, because photobucket sucks on my phone.